Encapsulate
发表于 2025-3-26 23:17:05
History and the Origin of Meaninghigher than that of the W-shaped specimens, and the specimens printed with a smaller nozzle have a load capacity of 15–20% higher. The DIC analysis reveals that the failure modes of the W-shaped and Y-shaped specimens are closely related to the strength of the mid-span nodes.
公理
发表于 2025-3-27 04:00:24
http://reply.papertrans.cn/25/2424/242395/242395_32.png
Presbycusis
发表于 2025-3-27 07:56:03
Influence of Printing Pattern on Bearing Capacity of 3D Printed Concrete Hollow Structureshigher than that of the W-shaped specimens, and the specimens printed with a smaller nozzle have a load capacity of 15–20% higher. The DIC analysis reveals that the failure modes of the W-shaped and Y-shaped specimens are closely related to the strength of the mid-span nodes.
引起痛苦
发表于 2025-3-27 11:57:37
http://reply.papertrans.cn/25/2424/242395/242395_34.png
无关紧要
发表于 2025-3-27 16:29:46
Conference proceedings 2024 July 2023 at Nanyang Technological University (NTU), Singapore. Covering a broad spectrum of topics, this volume presents research on established technologies, modeling, simulation, diverse materials (including recycled and geopolymer materials), fiber reinforcement, and composite materials, as wel
Armory
发表于 2025-3-27 21:41:18
http://reply.papertrans.cn/25/2424/242395/242395_36.png
把…比做
发表于 2025-3-27 22:04:54
https://doi.org/10.1007/978-94-017-0707-7ogy is expected to achieve the contradicting rheological requirements for 3DCP while benefiting from the superior strength and durability properties of HAAC. Two HAAC mixes with fly ash replacement levels of 12.5% and 25% with OPC were prepared to compare the fresh and hardened properties with a con
interrupt
发表于 2025-3-28 02:17:13
http://reply.papertrans.cn/25/2424/242395/242395_38.png
countenance
发表于 2025-3-28 08:55:16
An Expedition to Continuum Theoryrcement method is crucial. The bar insertion method has emerged as a promising approach, allowing for the insertion of conventional reinforcing bars into freshly printed layers to create a continuous reinforcement..However, this technique faces challenges related to the voids forming around the bar,
EXALT
发表于 2025-3-28 10:54:06
http://reply.papertrans.cn/25/2424/242395/242395_40.png