花争吵
发表于 2025-3-26 21:11:49
General Polynomial Method for the Design of Discrete-Time Controllers,Discrete unstable systems and systems containing dead time can be stabilized and controlled using the general polynomial method which is based on the solution of a D. equation. Some features of the method are presented.
Oration
发表于 2025-3-27 05:12:21
http://reply.papertrans.cn/24/2373/237238/237238_32.png
Trochlea
发表于 2025-3-27 06:32:00
https://doi.org/10.1007/978-981-10-8297-9Control Feedback; Continuous Control System; Control textbook; Discrete Control System; Controller Desig
AWE
发表于 2025-3-27 10:10:02
http://reply.papertrans.cn/24/2373/237238/237238_34.png
Arroyo
发表于 2025-3-27 14:21:42
Control Engineering978-981-10-8297-9Series ISSN 1439-2232 Series E-ISSN 2510-3814
广大
发表于 2025-3-27 20:26:29
http://reply.papertrans.cn/24/2373/237238/237238_36.png
SPER
发表于 2025-3-27 23:19:42
https://doi.org/10.1007/978-3-642-84545-1ecifications. Control is realized generally in closed loop based on negative feedback. An error signal is created comparing the measured output signal and the reference signal, which acts as an input to a controller unit which modifies the input of the process. The properties of a closed loop control system are analyzed.
根除
发表于 2025-3-28 02:30:32
http://reply.papertrans.cn/24/2373/237238/237238_38.png
Limerick
发表于 2025-3-28 06:16:06
W. P. Sexauer,G. J. Criner,S. G. Kelsenontinuous control systems . controllers can be easily implemented using operational amplifiers. With these effects generally the quality specifications set for a control system can be fulfilled supposing an adequate process model. Controller design can be done easily using consideration in the frequency domain.
忘恩负义的人
发表于 2025-3-28 12:10:52
http://reply.papertrans.cn/24/2373/237238/237238_40.png