枫树
发表于 2025-3-28 18:36:28
Numerical Simulation of Electromagnetic and Heat Transfer Phenomena in Inductively Heated Riserscontrol volume method. Computed results show that it is possible to prevent premature solidification of the riser even though traditional design criteria are violated. The significance of these findings pertaining to sand and ingot casting systems will be discussed.
Anticonvulsants
发表于 2025-3-28 22:10:25
http://reply.papertrans.cn/23/2203/220255/220255_42.png
拘留
发表于 2025-3-29 00:48:00
Numerical Simulation on Solidification Structure of 30Cr2Ni4MoV Steel Under Different Temperature Grre set to 8.9 × 10. and 4.5 × 10., respectively, then the simulation results are fit to the experimental results. The numerical simulations provides data on the grain morphology and the ratio of the columnar and equaixed areas. The numerical results are useful as the grain structure in heavy ingots can be revealed.
变形
发表于 2025-3-29 05:21:38
http://reply.papertrans.cn/23/2203/220255/220255_44.png
dilute
发表于 2025-3-29 10:03:15
Evaporation and Diffusion of Mn in Inert Systemsmatical model was constructed to link theoretical values to the results from the experiments. The high control over the system parameters allowed for the validation, rejection or creation of values and theories used in the model.
Offset
发表于 2025-3-29 13:16:20
http://reply.papertrans.cn/23/2203/220255/220255_46.png
人充满活力
发表于 2025-3-29 17:20:26
http://reply.papertrans.cn/23/2203/220255/220255_47.png
杀菌剂
发表于 2025-3-29 22:13:19
The development of nanotechnologyhenomena can be studied and the mechanisms of different pore formation investigated. When the powder particles are melted, the formed melt pool would solidify to form the single track and its density depends on the process parameters. The high speed, 1600 mm/s, of laser would result in less dense tr
固执点好
发表于 2025-3-30 01:42:02
Bhanu P. Sahu,Nikhil Biswas,Malay K. Dasl. The desulfurization kinetics were predicted using the CFD simulation results together with the thermodynamic calculations. This approach is validated in terms of the evolution of the sulfur content based on industrial data. As the model can considerably decrease the computational time and cost fo
LAVA
发表于 2025-3-30 04:47:04
http://reply.papertrans.cn/23/2203/220255/220255_50.png