Parabola
发表于 2025-3-26 21:41:00
http://reply.papertrans.cn/23/2203/220255/220255_31.png
Axillary
发表于 2025-3-27 01:11:18
http://reply.papertrans.cn/23/2203/220255/220255_32.png
TRACE
发表于 2025-3-27 09:16:00
Simulation of Non-metallic Inclusion Deposition and Clogging of NozzleWithout implementation of this step, unrealistic melt flow rate is obtained leading to incorrect particle deposition rate. In addition, if the clog growth is ignored, distribution of deposition material becomes more uniform with overestimated amount of total deposition mass.
渗透
发表于 2025-3-27 12:20:35
http://reply.papertrans.cn/23/2203/220255/220255_34.png
VICT
发表于 2025-3-27 17:18:03
http://reply.papertrans.cn/23/2203/220255/220255_35.png
误传
发表于 2025-3-27 20:20:23
Nanotechnology and product designre set to 8.9 × 10. and 4.5 × 10., respectively, then the simulation results are fit to the experimental results. The numerical simulations provides data on the grain morphology and the ratio of the columnar and equaixed areas. The numerical results are useful as the grain structure in heavy ingots can be revealed.
文件夹
发表于 2025-3-28 00:49:13
http://reply.papertrans.cn/23/2203/220255/220255_37.png
follicular-unit
发表于 2025-3-28 03:24:12
The development of nanotechnologymatical model was constructed to link theoretical values to the results from the experiments. The high control over the system parameters allowed for the validation, rejection or creation of values and theories used in the model.
Arctic
发表于 2025-3-28 07:43:20
https://doi.org/10.1007/978-3-7643-8321-3control volume method. Computed results show that it is possible to prevent premature solidification of the riser even though traditional design criteria are violated. The significance of these findings pertaining to sand and ingot casting systems will be discussed.
投票
发表于 2025-3-28 12:14:57
http://reply.papertrans.cn/23/2203/220255/220255_40.png