MAIZE
发表于 2025-3-28 16:51:41
http://reply.papertrans.cn/20/1921/192013/192013_41.png
Tailor
发表于 2025-3-28 22:50:26
http://reply.papertrans.cn/20/1921/192013/192013_42.png
anaphylaxis
发表于 2025-3-29 00:25:49
http://reply.papertrans.cn/20/1921/192013/192013_43.png
改进
发表于 2025-3-29 06:51:17
Cutting Force Model for Analysis of Burr Formation in Drilling Processciated with the axial component of the cutting force at the exit of the drill from the workpiece. The chip should also be controlled to flow toward the radial direction of the drilling tool. The lip geometry of the twist drill is discussed to reduce burr formation with the curved edges in the cutting simulation.
忍受
发表于 2025-3-29 08:12:36
http://reply.papertrans.cn/20/1921/192013/192013_45.png
直觉好
发表于 2025-3-29 14:09:15
http://reply.papertrans.cn/20/1921/192013/192013_46.png
chuckle
发表于 2025-3-29 16:28:21
http://reply.papertrans.cn/20/1921/192013/192013_47.png
硬化
发表于 2025-3-29 20:35:50
Jan C. Aurich,David DornfeldState of the art about burrs - analysis, control and removal.Includes supplementary material:
neurologist
发表于 2025-3-30 00:10:04
http://image.papertrans.cn/b/image/192013.jpg
冥想后
发表于 2025-3-30 05:30:57
http://reply.papertrans.cn/20/1921/192013/192013_50.png