Awning
发表于 2025-3-26 22:29:01
http://reply.papertrans.cn/20/1921/192013/192013_31.png
强化
发表于 2025-3-27 01:55:03
http://reply.papertrans.cn/20/1921/192013/192013_32.png
畸形
发表于 2025-3-27 09:16:48
http://reply.papertrans.cn/20/1921/192013/192013_33.png
谷类
发表于 2025-3-27 10:22:34
http://reply.papertrans.cn/20/1921/192013/192013_34.png
ordain
发表于 2025-3-27 15:03:09
http://reply.papertrans.cn/20/1921/192013/192013_35.png
ingestion
发表于 2025-3-27 21:14:46
Burr and Cap Formation by Orbital Drilling of Aluminum the effects of orbital drilling on cap and burr formation in the exit composite material, primed clad aluminum 2024. The influence on cap and burr formation with different tool geometries, different coatings, different cutting parameters, tool wear and minimum quantity lubrication were examined.
冰河期
发表于 2025-3-27 22:57:29
http://reply.papertrans.cn/20/1921/192013/192013_37.png
Respond
发表于 2025-3-28 04:14:08
Developing a Process Model for Abrasive Flow Machininge functional correlations between setting parameters and work results. This paper presents an approach using a numerical simulation to develop a process model. Furthermore a model is introduced that describes the fundamental principles of the deburring process using AFM.
LUT
发表于 2025-3-28 06:27:40
http://reply.papertrans.cn/20/1921/192013/192013_39.png
重叠
发表于 2025-3-28 11:17:02
http://reply.papertrans.cn/20/1921/192013/192013_40.png