GORGE
发表于 2025-3-25 07:23:22
Influence of Minimum Quantity Lubrication on Burr Formation in Millingvoidance or at least minimisation of burr formation offers potential for a more economical production. Another possibility to save costs is to use minimum quantity lubrication. The investigation into the burr formation in milling with minimum quantity lubrication combines these two approaches. The t
放弃
发表于 2025-3-25 10:14:16
Conference proceedings 2010essing, and have to be removed by a special deburring process. Toleration of burrs, which are not part of functional edges, depends on their respective shape and size. High inspection effort is necessary to guarantee the workpiece quality. Therefore, the research results on burrs, with a focus on bu
Frequency-Range
发表于 2025-3-25 14:57:40
https://doi.org/10.1007/978-1-4419-7765-6al properties which decreases burr formation. In this paper, methods for burr minimization in various cutting processes are presented. Burr reduction strategies for turning, drilling and milling of different materials are presented.
愉快么
发表于 2025-3-25 19:22:16
http://reply.papertrans.cn/20/1921/192013/192013_24.png
inchoate
发表于 2025-3-25 23:13:52
Sławomir Kopeć,G. Larry Bretthorste titanium alloys Ti-6Al-4 V and Ti-6Al-7Nb with 48 μm micro-end mills. Large areas are machined to observe the micro structure on the surface and the influence on surface quality. The burr formations in slot milling is observed and compared to still existing models. Up milling and down milling at the sidewalls were compared.
Insatiable
发表于 2025-3-26 02:03:12
Burr Minimization Strategies in Machining Operationsal properties which decreases burr formation. In this paper, methods for burr minimization in various cutting processes are presented. Burr reduction strategies for turning, drilling and milling of different materials are presented.
Palter
发表于 2025-3-26 06:03:43
http://reply.papertrans.cn/20/1921/192013/192013_27.png
山顶可休息
发表于 2025-3-26 09:23:06
Burr Formation and Surface Characteristics in Micro-End Milling of Titanium Alloyse titanium alloys Ti-6Al-4 V and Ti-6Al-7Nb with 48 μm micro-end mills. Large areas are machined to observe the micro structure on the surface and the influence on surface quality. The burr formations in slot milling is observed and compared to still existing models. Up milling and down milling at the sidewalls were compared.
手榴弹
发表于 2025-3-26 16:30:08
Conference proceedings 2010e shape and size. High inspection effort is necessary to guarantee the workpiece quality. Therefore, the research results on burrs, with a focus on burr analysis and control as well as on cleanability and burr removal based on the presentations held at the conference are valuable for researchers and engineers in manufacturing development..
GROVE
发表于 2025-3-26 18:57:41
http://reply.papertrans.cn/20/1921/192013/192013_30.png