TSH582
发表于 2025-3-23 11:49:53
http://reply.papertrans.cn/16/1501/150092/150092_11.png
Bumptious
发表于 2025-3-23 17:29:47
Sliding Mode Multimodel Control, The sliding mode design approach usually consists of two steps ,. First, the switching surface is designed such that the system motion on the sliding mode satisfies design specifications. Second, a control law is designed making the switching surface attractive to the system state.
ungainly
发表于 2025-3-23 18:57:47
http://reply.papertrans.cn/16/1501/150092/150092_13.png
BUOY
发表于 2025-3-24 02:00:39
http://reply.papertrans.cn/16/1501/150092/150092_14.png
史前
发表于 2025-3-24 05:33:47
http://reply.papertrans.cn/16/1501/150092/150092_15.png
cutlery
发表于 2025-3-24 07:26:25
http://reply.papertrans.cn/16/1501/150092/150092_16.png
厌恶
发表于 2025-3-24 11:17:45
http://reply.papertrans.cn/16/1501/150092/150092_17.png
CALL
发表于 2025-3-24 16:21:43
http://reply.papertrans.cn/16/1501/150092/150092_18.png
GRATE
发表于 2025-3-24 19:34:10
http://reply.papertrans.cn/16/1501/150092/150092_19.png
osteopath
发表于 2025-3-24 23:14:56
Variable Structure Control Systems using Sectors for Switching Rule Design,2] have been proposed. With any method mentioned above, a VS control law should be designed such that the system enters the boundary layer, or the second order sliding mode, or the sliding sector, i.e., a reaching phase is necessary for VS control systems.