daredevil
发表于 2025-3-30 10:06:53
Performance-Driven Fan Case Design for Durability Evaluation in a Blade Impact Event,d lattice structure core (LSC) sandwiched between the inner ring and outer cover. Bi-directional corrugated lattices have distinct impact resistance owing to excellent strength to stiffness ratio at a low relative density which makes it ideal for design against impact. Four cases with different (LSC
REIGN
发表于 2025-3-30 16:05:18
http://reply.papertrans.cn/15/1499/149891/149891_52.png
钻孔
发表于 2025-3-30 19:15:58
,Viscoplastic Constitutive Parameters for Inconel Alloy-625 at 843 K,FR systems is around 843 K at which failure modes such as creep and creep–fatigue interaction are significant. Viscoplastic analysis gives the combined strains due to fatigue including stress relaxation during hold time. This paper presents the estimation and validation of the parameters of Inconel
召集
发表于 2025-3-30 23:52:52
Design of Shock Absorber for Radioactive Coolant Tube Transportation Cask and Impact Analysis of Caration of cask is not type approved and will not qualify for regulatory accident condition tests. In order to meet compliance with the regulatory requirements of IAEA/AERB such as 9 m drop on unyielding target and 800 °C thermal test, an external shock absorber along with thermal shield should be de
含沙射影
发表于 2025-3-31 03:18:51
http://reply.papertrans.cn/15/1499/149891/149891_55.png
慢慢流出
发表于 2025-3-31 06:19:07
http://reply.papertrans.cn/15/1499/149891/149891_56.png
impaction
发表于 2025-3-31 12:48:28
,Synthesis and Comparative Characterization of Electroless Ni–P, Ni–P-nano-Al2O3 and Duplex Ni–P/ Niorporation of a second phase micro or nanoelement into the Ni–P matrix widens the area of applications for these types of coatings. Researchers are showing their interest to develop more innovative electroless coatings where they are deploying different types of second phase material to enhance thei
兽群
发表于 2025-3-31 17:15:22
Clamped Beam Bending for Mixed Mode Fracture Toughness Measurements, V. & Biswas, S. K.: A new method for fracture toughness determination of graded (Pt,Ni)Al bond coats by microbeam bend tests. Philos. Mag. 92, 3326–3345 (2012).; Mishra, A. K., Lambai, A., Jayaram, V. & Jaya, B. N.: The edge-notched clamped beam bend specimen as a fracture toughness test geometry.