浮雕
发表于 2025-3-28 17:03:18
Design, Impact and Thermo-Mechanical Analysis of Radioactive Surveillance Specimen Transportation Cder 9 m drop on unyielding target are carried out with shock absorber and finalized cask configuration so as to meet the structural integrity requirement. Coupled transient thermo-mechanical FE simulation of the cask has been carried out to evaluate performance and assess the structural integrity of
出来
发表于 2025-3-28 19:28:30
,Synthesis and Comparative Characterization of Electroless Ni–P, Ni–P-nano-Al2O3 and Duplex Ni–P/ Ni a composite coating where nanoalumina was incorporated into the electroless Ni–P matrix, and the third coating was a duplex coating with the inner layer having Ni–P and the outer layer consisting of a Ni–P layer incorporated with nanoalumina particles. Characterization of the deposits by scanning e
变形词
发表于 2025-3-29 00:48:29
Clamped Beam Bending for Mixed Mode Fracture Toughness Measurements,rack length using the finite element method (FEM). FEM results show that clamped beam with offset loading point is able to provide pure mode I, pure mode II and any mixed mode loading condition for L/W = 4 with a/W = 0.5 to 0.7. Clamped beam with angled crack shows pure mode I and mixed mode but can
钩针织物
发表于 2025-3-29 03:22:45
http://reply.papertrans.cn/15/1499/149891/149891_44.png
四牛在弯曲
发表于 2025-3-29 09:28:53
http://reply.papertrans.cn/15/1499/149891/149891_45.png
AGONY
发表于 2025-3-29 12:16:24
http://reply.papertrans.cn/15/1499/149891/149891_46.png
cyanosis
发表于 2025-3-29 16:12:04
http://reply.papertrans.cn/15/1499/149891/149891_47.png
boisterous
发表于 2025-3-29 21:39:55
http://reply.papertrans.cn/15/1499/149891/149891_48.png
Collar
发表于 2025-3-30 02:01:31
http://reply.papertrans.cn/15/1499/149891/149891_49.png
沙漠
发表于 2025-3-30 06:50:34
Remaining Life of Fastener Joints Under Bearing and Bypass Fatigue Loading,s are computed using MVCCI formulation. This approach helps in estimating the remaining life of the joint at any given operational conditions which in turn assists in the development of a computational model to build a digital twin for structural joints.