Limerick
发表于 2025-3-26 23:22:54
http://reply.papertrans.cn/15/1499/149891/149891_31.png
妨碍议事
发表于 2025-3-27 03:39:18
,Schlußbetrachtung und Ausblick,mpressive strength of the glass/epoxy (GE) sample increases up by 7.4% and 5.8% with RODCF addition of 0.25% and 0.5% by weight of epoxy, respectively. The signals obtained from the incident bar strain gauge and the transmitter bar strain gauge were used to obtain force versus time plots. The neat G
TATE
发表于 2025-3-27 06:48:30
https://doi.org/10.1007/978-3-663-08318-4tion provided by the tungsten atoms. Alpha (BCC) to Omega (HCP) phase transformation was observed in . oriented single crystal. The addition of tungsten to tantalum resisted this phase transformation.
天赋
发表于 2025-3-27 09:57:30
Schwachstellen bei Publikationssystemen,s at all levels of loading. Hybridizing CFRP laminate with GFRP lamina on the third interface is found to be an efficient way to improve delamination tolerance without reducing laminate resistance to flexural and impact loads.
FAST
发表于 2025-3-27 13:59:27
http://reply.papertrans.cn/15/1499/149891/149891_35.png
Tempor
发表于 2025-3-27 18:10:45
https://doi.org/10.1007/978-3-642-46799-8at a frequency of 0.3 Hz. Hysteresis loops are determined for all the fatigue tests at half of the fatigue life. Cyclic stress response curves are generated and noted that the alloy tends to show neither cyclic hardening nor cyclic softening during the pure axial fatigue. On the other hand, it shows
MAIZE
发表于 2025-3-27 23:38:48
Implementierung der Beleuchtungsmodelles are computed using MVCCI formulation. This approach helps in estimating the remaining life of the joint at any given operational conditions which in turn assists in the development of a computational model to build a digital twin for structural joints.
Limpid
发表于 2025-3-28 04:54:21
Performance-Driven Fan Case Design for Durability Evaluation in a Blade Impact Event,ted by comparing the plastic damage, energy absorption, blade momentum and crack propagation. Essentially, having sufficient inner ring stiffness is vital to resist the abrupt impact forces while maintaining structural integrity, for which a suitable thickness of 1mm is estimated after performing e
maudtin
发表于 2025-3-28 08:28:11
,Molecular Dynamics Simulations of Dislocation Nucleation from a Pristine and Damaged Grain Boundaryhighlights a change in the underlying kinetics of the deformation process when a damaged grain boundary is present in the material. Consequently, this approach can be generalized to determine kinetic parameters for other thermally activated grain boundary-dominated deformation or failure processes i
Cabg318
发表于 2025-3-28 12:27:55
Design of Shock Absorber for Radioactive Coolant Tube Transportation Cask and Impact Analysis of Caof cask with shock absorber is evaluated in all possible most damaging orientations under 9 m drop on rigid target. It is observed that cask components meet the structural integrity requirements. Also, delicate thermal shield is protected without any damage. Thermal analysis of cask with thermal shi