隐语 发表于 2025-3-25 07:04:25

http://reply.papertrans.cn/15/1488/148748/148748_21.png

Lucubrate 发表于 2025-3-25 07:59:50

http://reply.papertrans.cn/15/1488/148748/148748_22.png

flimsy 发表于 2025-3-25 13:06:01

Eve Mitleton-Kelly,Paul Lukowiczd the interference between the seal and housing. In this paper, the existing seal is analyzed with the help of numerical analysis called finite element method. Finally, the optimized seal is manufactured and validated experimentally. The optimized seal met the required seal opening pressure of less than 0.125 MPa.

oracle 发表于 2025-3-25 17:38:38

http://reply.papertrans.cn/15/1488/148748/148748_24.png

不可知论 发表于 2025-3-25 22:58:23

http://reply.papertrans.cn/15/1488/148748/148748_25.png

scrape 发表于 2025-3-26 03:25:48

http://reply.papertrans.cn/15/1488/148748/148748_26.png

别名 发表于 2025-3-26 08:01:40

https://doi.org/10.1007/978-981-15-5988-4culate composite. Experimental investigation of the density changes, mass savings, and water absorption behavior of the WH powder-based composite was performed, and its behavior has been presented in the current paper. Comparisons were made between the density and water absorption behavior of the no

leniency 发表于 2025-3-26 08:57:05

http://reply.papertrans.cn/15/1488/148748/148748_28.png

我吃花盘旋 发表于 2025-3-26 13:13:31

https://doi.org/10.1007/978-3-642-36614-7o processed samples, respectively. Strength and hardness increased because of the grain refinement for the processed samples and the introduction of the high amount of dislocation density into the material during the MAF process. Fracture study was conducted by utilizing scanning electron microscopy

Lobotomy 发表于 2025-3-26 20:42:23

http://reply.papertrans.cn/15/1488/148748/148748_30.png
页: 1 2 [3] 4 5 6 7
查看完整版本: Titlebook: Advances in Manufacturing Technology; Select Proceedings o Somashekhar S. Hiremath,N. Siva Shanmugam,B. R. Ra Conference proceedings 2019 S