kyphoplasty
发表于 2025-3-23 12:31:05
http://reply.papertrans.cn/15/1488/148748/148748_11.png
BUCK
发表于 2025-3-23 14:52:55
http://reply.papertrans.cn/15/1488/148748/148748_12.png
GRAZE
发表于 2025-3-23 18:12:58
http://reply.papertrans.cn/15/1488/148748/148748_13.png
Gum-Disease
发表于 2025-3-23 23:41:20
Conference proceedings 2019acturing problems at various levels starting from material designs to complex manufacturing systems are also discussed. This book will be useful for students, researchers, and practitioners working in the field of manufacturing technology.
bifurcate
发表于 2025-3-24 05:19:35
http://reply.papertrans.cn/15/1488/148748/148748_15.png
细查
发表于 2025-3-24 09:43:13
http://reply.papertrans.cn/15/1488/148748/148748_16.png
裹住
发表于 2025-3-24 13:26:02
http://reply.papertrans.cn/15/1488/148748/148748_17.png
Instrumental
发表于 2025-3-24 17:04:18
http://reply.papertrans.cn/15/1488/148748/148748_18.png
spondylosis
发表于 2025-3-24 21:13:26
https://doi.org/10.1007/978-4-431-65910-5ss of the machined surface is backed up with scanning electron microscopy (SEM). The contribution of parameters on responses was determined by analysis of variance, and regression models were obtained for material removal rate and surface roughness.
在驾驶
发表于 2025-3-25 01:04:51
https://doi.org/10.1007/978-981-15-5988-4 current consisting of half-cycle of AC current and another half-cycle of DCEN mode was also carried out on PCTIG welding. Due to the influence of the DCEN current, the mechanical properties suffer reduction and weld strength lies between the AC and DCEN welded conditions.