scotoma
发表于 2025-3-26 23:19:43
http://reply.papertrans.cn/15/1488/148743/148743_31.png
Serenity
发表于 2025-3-27 04:16:57
Conference proceedings 2019nd advanced metal forming. The book particularly focuses on finite element simulation and optimization, which aid in reducing experimental costs and time. This book is a valuable resource for students, researchers, and professionals alike..
内行
发表于 2025-3-27 06:24:37
http://reply.papertrans.cn/15/1488/148743/148743_33.png
吞下
发表于 2025-3-27 11:20:16
2195-4356 optimization, which aid in reducing experimental costs and time. This book is a valuable resource for students, researchers, and professionals alike..978-981-13-4669-9978-981-13-1724-8Series ISSN 2195-4356 Series E-ISSN 2195-4364
cliche
发表于 2025-3-27 17:13:37
Sergey Arkhangelskiy,Ilya Muchniks, heat source model and the governing equations were incorporated into the finite element model. It is found that the predicted values of temperature while using three-dimensional finite element model are in good agreement with the experimental values.
付出
发表于 2025-3-27 20:49:36
Reliability and Yield Improvement,uct the experimentation. This study is aimed to optimize the turning parameters to minimize the cutting force, surface waviness and flank wear by means of composite desirability grade approach. The analysis of variance (ANOVA) is conducted for composite desirability grade to recognize the influence of each turning parameter upon the responses.
CARE
发表于 2025-3-28 00:57:46
http://reply.papertrans.cn/15/1488/148743/148743_37.png
slow-wave-sleep
发表于 2025-3-28 02:12:49
http://reply.papertrans.cn/15/1488/148743/148743_38.png
某人
发表于 2025-3-28 07:43:40
http://reply.papertrans.cn/15/1488/148743/148743_39.png
Costume
发表于 2025-3-28 12:48:06
https://doi.org/10.1007/978-3-319-97788-1d and powder feed rate. The microhardness of the clad layer was measured, and the macrostructure of the clad area was analysed. The influences of the laser process parameters are observed, and optimum parameters were obtained to improve the clad quality.