BUDGE
发表于 2025-3-23 10:54:11
Tarek Mabrouki,Habib Sahlaoui,Nourredine BenyahyaReports on cutting-edge methods to analyse/improve/monitor additive manufacturing processes and products.Covers applications of numerical methods, CAD, and machine learning.Offers a good balance of th
六个才偏离
发表于 2025-3-23 16:16:09
Lecture Notes in Mechanical Engineeringhttp://image.papertrans.cn/a/image/146613.jpg
类人猿
发表于 2025-3-23 21:39:05
Advances in Additive Manufacturing: Materials, Processes and Applications978-3-031-47784-3Series ISSN 2195-4356 Series E-ISSN 2195-4364
Pituitary-Gland
发表于 2025-3-23 23:53:27
https://doi.org/10.1007/978-3-031-47784-3Quality of 3D printed Parts; Thermomechanical Welding; Accuracy in Additive Manufacturing; Adaptive Sli
喷出
发表于 2025-3-24 04:07:00
http://reply.papertrans.cn/15/1467/146613/146613_15.png
踉跄
发表于 2025-3-24 10:32:51
http://reply.papertrans.cn/15/1467/146613/146613_16.png
prolate
发表于 2025-3-24 11:27:48
https://doi.org/10.1007/978-3-662-21595-1 from the resolution of LPBF and the flexibility of DED. However, the microstructures and mechanical properties obtained by these processes are very different. This causes the hybrid parts to be very heterogeneous. The mechanical behavior of hybrid LPBF-DED Inconel 625 parts are investigated under s
Ruptured-Disk
发表于 2025-3-24 15:04:51
http://reply.papertrans.cn/15/1467/146613/146613_18.png
FLAX
发表于 2025-3-24 20:20:15
https://doi.org/10.1007/978-94-015-3514-4 carried out: (E0) as received state, (E1 and E2) solution annealing treatment and (E3) aging treatment. Microhardness, impact-strength, and wear tests are carried out to determine the effect of treatment on the mechanical properties of SLMed 17-4PH. The results showed that the hardness of 17-4PH at
样式
发表于 2025-3-25 00:22:50
http://reply.papertrans.cn/15/1467/146613/146613_20.png