Outspoken
发表于 2025-3-30 08:25:38
http://reply.papertrans.cn/15/1467/146613/146613_51.png
非实体
发表于 2025-3-30 15:44:13
,In-Situ Monitoring of Selective Laser Melted Ti–6Al–4V Parts Using Eddy Current Testing and Machineption of new applications that become possible by using these new algorithms...This book can serve as a starting point for PhD students entering the field and will also benefit professionals..978-1-84996-693-1978-1-84628-984-2
没花的是打扰
发表于 2025-3-30 16:41:02
http://reply.papertrans.cn/15/1467/146613/146613_53.png
Apogee
发表于 2025-3-30 23:33:23
http://reply.papertrans.cn/15/1467/146613/146613_54.png
左右连贯
发表于 2025-3-31 04:08:00
https://doi.org/10.1007/978-3-662-21595-1found to be the limitation in both the static and the fatigue strengths of hybrid samples. Hybrid samples perform as well as or better than mono-process DED. In static loading, the local behavior of the hybrid samples and the yield tensile strength gap between LPBF and DED determine the global behav
osteocytes
发表于 2025-3-31 08:23:35
https://doi.org/10.1007/978-3-662-21595-1s, but a lower ductility. Thermal treatment led to the precipitation of a σ phase in Al-containing HEAs, and of a secondary FCC phase in Cu-containing alloys. Finally, this paper proves the potential of the CoCrFeNiAl. alloy family compared to single-phase stainless steels such as 316L and two-phase
维持
发表于 2025-3-31 11:46:31
Bookish Objects on the Bookshelfat low titers. The 3D printed bio-carrier has also been used to enrich in vitro preparations for priming phage cultures to rapidly achieve high titers suitable for phage therapy applications. Phage therapy is used as a potential substitute for chemical antibacterial therapy..A Design Of Experience w
Debrief
发表于 2025-3-31 15:34:53
Bookish Objects on the Bookshelf test and the applied load vs. the punch stroke is experimentally obtained showing the influence of the printing parameters on the mechanical responses. The effect of the raster orientation is then clearly observed showing that the raster orientation of −45°/45° leads to more resistant parts. Finall
比赛用背带
发表于 2025-3-31 21:34:01
Corinna Norrick-Rühl,Shafquat Towheedations for educational purposes in the field of robotics. The results demonstrate the potential of 3D printing in the development of educational robot prototypes, and the importance of open-source models for the circularity and the availability of robotics education.
高度
发表于 2025-3-31 23:01:28
http://reply.papertrans.cn/15/1467/146613/146613_60.png