MARS
发表于 2025-3-25 06:39:35
http://reply.papertrans.cn/95/9419/941859/941859_21.png
格言
发表于 2025-3-25 08:42:51
http://reply.papertrans.cn/95/9419/941859/941859_22.png
antidepressant
发表于 2025-3-25 13:04:38
Experimental Comparison of PID vs. PID Plus Nonlinear Controller for Subsea Robots,d the design of this additional loop does not rely on the system model and is simple to tune. The results presented in this paper were obtained using the VORTEX vehicle both in simulation and during real experiments; they demonstrate the advantages of using a PID with this nonlinear loop over a simp
暂时中止
发表于 2025-3-25 16:29:21
http://reply.papertrans.cn/95/9419/941859/941859_24.png
Individual
发表于 2025-3-25 22:34:20
Motion Planning and Contact Control for a Tele-Assisted Hydraulic Underwater Robot,n to the modelling of hydraulic underwater robots and to the resulting design of hybrid position/force control strategies. A model for a hydraulically actuated robot is developed, taking into account the electrohydraulic servovalve, the bulk modulus of oil, piston area, friction, hose compliance and
Aggrandize
发表于 2025-3-26 01:28:50
http://reply.papertrans.cn/95/9419/941859/941859_26.png
Myelin
发表于 2025-3-26 08:09:03
OTTER: The Design and Development of an Intelligent Underwater Robot,ly integrated into a single robotic system. Examples of new technologies demonstrated on the OTTER underwater robot include control from a real-time vision-sensing system, coordinated arm/vehicle control, and control from 3D graphical user interfaces.
中国纪念碑
发表于 2025-3-26 10:34:52
Book 1996nsider the environment where undersea robots must operate. The pressure they are subjected to can be enormous, thus requiring extremely rugged designs. The deep oceans range between 19,000 to 36,000 ft. At a mere 33-foot depth, the pressure will be twice the normal one atmosphere pressure of 29. 4 p
Mercurial
发表于 2025-3-26 14:36:07
http://reply.papertrans.cn/95/9419/941859/941859_29.png
Angioplasty
发表于 2025-3-26 17:33:48
http://reply.papertrans.cn/95/9419/941859/941859_30.png