骚扰
发表于 2025-3-28 16:05:59
Advanced Modeling Tools for Processing and Lifing of Aeroengine Componentsich are very useful for a better understanding of specific issues such as heterogeneous grain growth. From a component lifing point of view, the initial state of stress is also a key parameter to be considered. One method for the control of residual stresses is application of a pre-spinning process.
评论性
发表于 2025-3-28 21:43:30
Developing Alloy Compositions for Future High Temperature Disk Rotorsibution were found to influence tensile and creep behavior. One of the new alloys (Alloy 2) showed improved yield and tensile strength compared to RR1000. Alloy 2 displayed similar initial creep strain behavior to RR1000 but superior resistance to subsequent creep damage, producing longer creep rupt
蹒跚
发表于 2025-3-28 23:24:13
http://reply.papertrans.cn/89/8818/881755/881755_43.png
缺陷
发表于 2025-3-29 04:15:33
http://reply.papertrans.cn/89/8818/881755/881755_44.png
相同
发表于 2025-3-29 07:35:40
On the Influence of Alloy Composition on Creep Behavior of Ni-Based Single-Crystal Superalloys (SXs)t treatment and that ERBO/15-W creeps significantly faster. At constant microstructures, ERBO/15 and ERBO/1 show similar creep behavior. In the high-temperature and low-stress creep regime, ERBO/15 shows lower minimum creep rates but ERBO/1 features a slower increase of creep rate in the tertiary cr
报复
发表于 2025-3-29 11:28:42
http://reply.papertrans.cn/89/8818/881755/881755_46.png
arousal
发表于 2025-3-29 17:07:25
Alloy Design and Microstructural Evolution During Heat Treatment of Newly Developed Cast and Wroughtling rate after solution treatment, and this also resulted in modifying the precipitation behavior of tertiary .′ during aging. In this study, microstructural evolution and tensile properties at 650 °C were investigated to clarify the relationship between them and to identify the strengthening mecha
有常识
发表于 2025-3-29 21:23:06
http://reply.papertrans.cn/89/8818/881755/881755_48.png
Condyle
发表于 2025-3-30 02:26:59
http://reply.papertrans.cn/89/8818/881755/881755_49.png
伪造
发表于 2025-3-30 07:26:26
http://reply.papertrans.cn/89/8818/881755/881755_50.png