温顺
发表于 2025-3-25 03:33:53
http://reply.papertrans.cn/89/8818/881755/881755_21.png
bisphosphonate
发表于 2025-3-25 10:40:43
http://reply.papertrans.cn/89/8818/881755/881755_22.png
FADE
发表于 2025-3-25 13:57:55
Advanced Alloy Design Program and Improvement of Sixth-Generation Ni-Base Single Crystal Superalloy P. Creep rupture life prediction equations for five different creep conditions, 800 °C/735 MPa, 900 °C/392 MPa, 1000 °C/245 MPa, 1100 °C/137 MPa, and 1150 °C/137 MPa, were obtained with excellent determination coefficients from 0.95 to 0.98. Using the AADP, we successfully developed three alloys, TM
剥削
发表于 2025-3-25 16:53:11
http://reply.papertrans.cn/89/8818/881755/881755_24.png
Accede
发表于 2025-3-25 21:35:24
A New Co-free Ni-Based Alloy for Gas Turbine and Exhaust Valve Applicationsue crack growth rate has been laboratory developed and scaled up in the mill. Based on studies of a relatively wide compositional space, a Co-free composition was selected. Other properties, including tensile strength, stress rupture, creep, low cycle fatigue, oxidation, and sulfidation resistance,
Seminar
发表于 2025-3-26 03:12:49
On the Influence of Alloy Chemistry and Processing Conditions on Additive Manufacturability of Ni-Bawith emphasis on their capability to resist cracking—is assessed by comparing with the two legacy alloys IN939 and CM247LC. The two new alloys are found to have demonstrably superior printability. Thermophysical testing and quantitative characterization, particularly via stereology, are used to help
归功于
发表于 2025-3-26 08:10:40
http://reply.papertrans.cn/89/8818/881755/881755_27.png
innovation
发表于 2025-3-26 10:17:49
Precipitate Phase Stability and Mechanical Properties of Alloy 263 and Variants in Wrought or Cast Fposure times in this type of environment are considerable with target creep properties specified at 100,000 h making phase stability an important parameter in the alloy selection process. In this investigation, the microstructure of alloy 263 and two modified compositions in both cast and cast/wroug
牵索
发表于 2025-3-26 13:30:37
Conference proceedings 2020e traditional focus areas of alloy development, processing, mechanical behavior, coatings, and environmental effects, this volume includes contributions from academia, supply chain, and product-user members of the superalloy community that highlight technologies that contribute to improving manufact
aerial
发表于 2025-3-26 17:44:56
http://reply.papertrans.cn/89/8818/881755/881755_30.png