绿州
发表于 2025-3-25 05:30:31
Three-Dimensional Fractography for Conventional and Additive Manufactured Steels After Bending-Torsical aspects of fracture for notched specimens made of high-strength steels processed by both conventional and additively manufacturing (AM) techniques, an optical surface profilometer was used. Three bending moment to torsion moment ratios (./.) were studied, i.e. 2, 1 and 2/3. The geometries were s
iodides
发表于 2025-3-25 07:40:13
http://reply.papertrans.cn/88/8800/879973/879973_22.png
SPER
发表于 2025-3-25 13:47:39
Metal Additive Manufacturing of End-Use Components and Parts: A Practical Overviewnd parts by additive manufacturing (AM). The latest achievements and news are also discussed with special attention on defining the real production capability of each technological AM option under investigation. As general conclusion, by the present technical review, it was possible to confirm the p
senile-dementia
发表于 2025-3-25 18:05:45
http://reply.papertrans.cn/88/8800/879973/879973_24.png
negotiable
发表于 2025-3-25 22:30:03
http://reply.papertrans.cn/88/8800/879973/879973_25.png
aggressor
发表于 2025-3-26 03:05:00
http://reply.papertrans.cn/88/8800/879973/879973_26.png
synovium
发表于 2025-3-26 04:26:42
http://reply.papertrans.cn/88/8800/879973/879973_27.png
AGATE
发表于 2025-3-26 10:33:57
Early Evidences on the Rotating Bending Fatigue Properties of Ductile and Vermicular Cast Ironse moment in terms of utilization, despite different potentials. This experiment compares the results of the Rotating Bending Fatigue test for cast iron specimens made under foundry process conditions as identical as possible in the way to reduce bias.
Bother
发表于 2025-3-26 15:19:55
Rotating Bending Fatigue of Spheroidal Cast Ironse moment in terms of utilization, despite different potentials. This experiment compares the results of the Rotating Bending Fatigue test for cast iron specimens made under foundry process conditions as identical as possible in the way to reduce bias.
Basal-Ganglia
发表于 2025-3-26 18:23:03
Finite Element Analysis of Distortions, Residual Stresses and Residual Strains in Laser Powder Bed Fng problem. Simulations are proposed and conduced that aim at comparing two software packages against each other and against experimental data; results are discussed, and lastly, conclusions are achieved.