FIN 发表于 2025-3-23 11:32:20

Early Evidences on the Rotating Bending Fatigue Properties of Ductile and Vermicular Cast Ironslent mechanical and tribological properties, but also to a certain flexibility of the same. In fact, it can be produced in various types of metal alloy, which differ significantly in properties: from the poorly performing, but economical white cast iron, to the excellent resistant nodular cast iron.

断断续续 发表于 2025-3-23 16:32:02

http://reply.papertrans.cn/88/8800/879973/879973_12.png

伪书 发表于 2025-3-23 19:21:59

http://reply.papertrans.cn/88/8800/879973/879973_13.png

愚蠢人 发表于 2025-3-24 02:03:10

Acoustic Emission Characteristics for Determining Fatigue Damage Behaviourgate the acoustic emission characteristics of the reinforced concrete beam subjected to fatigue loading at different sensors. Laboratory experiments were performed on the 150 mm × 150 mm × 750 mm reinforced concrete beam under fatigue loading in conjunction with acoustic emission monitoring. Then, t

兽皮 发表于 2025-3-24 04:32:31

http://reply.papertrans.cn/88/8800/879973/879973_15.png

来就得意 发表于 2025-3-24 08:32:19

Predicted Distribution in Measured Fatigue Life from Expected Distribution in Cyclic Stress–strain Panalysis a challenge. Using a strain energy based damage model to predict strain-life and stress-life curves from individual specimens (Huffman in Int J Fatigue 88:197–204, 2016 ), a set of curves can be created to more accurately reflect the range of strain-life values that would come from more

大炮 发表于 2025-3-24 11:15:13

Modification Optimization-Based Fatigue Life Analysis and Improvement of EMU Gearmulative damage theory. A fatigue life analysis method by modifying S–N curve and considering material difference is presented to improve the fatigue life of EMU gear based on shape modification optimization. A corrected method for stress amplitude, average stress, and S–N curve is proposed, which c

共栖 发表于 2025-3-24 15:02:34

Fatigue Life Analysis of Strain Loadings Using Effective Strain Damage Approach with the Consideratiffect. Fatigue failure of automobile coil spring is common occurrence that is subjected to random loading due to road conditions. Load sequence effect was found to have more significant effects in the automobile coil spring strain signals with many high amplitude events. Strain time histories of coi

诱导 发表于 2025-3-24 19:48:23

http://reply.papertrans.cn/88/8800/879973/879973_19.png

Aerate 发表于 2025-3-25 00:01:03

FE Modelling of the Fatigue Behaviour of L-PBF Inconel 718 with As-Built Surfacesas been demonstrated that surface roughness has a key influence on high-cycle fatigue properties of components. As-built surfaces contain notch-like features that work as stress concentration sites where fatigue crack nucleation may occur. These typical morphologies due to Laser-Powder Bed Fusion (L
页: 1 [2] 3 4 5 6
查看完整版本: Titlebook: Structural Integrity and Fatigue Failure Analysis; Experimental, Theore Grzegorz Lesiuk,Mieczyslaw Szata,José A.F.O. Corre Conference proce