MURKY
发表于 2025-3-30 08:33:12
Iterative Learning Control Based on Force Measurements for Automatic Impulse Hammers,ing of the parameters of the hammer electronic. As the hammer is equipped with a high-quality force sensor anyway, the idea is close to utilize that force sensor signal to control the hammer. Usually these sensors are ICP-Sensors that are directly connected to the data acquisition system that is use
Notify
发表于 2025-3-30 13:06:49
http://reply.papertrans.cn/88/8738/873721/873721_52.png
Medicaid
发表于 2025-3-30 16:47:27
http://reply.papertrans.cn/88/8738/873721/873721_53.png
aqueduct
发表于 2025-3-31 00:35:34
Design and Integration of a Hydroelastic Solver in the Dynamic Model of a Scaled Marine HydrokinetiK) kite. MHK kites are systems designed to optimally harvest current and tidal energy from bodies of water by executing cross-current flight patterns to augment velocity and therefore power generation. Due to the significant fluid-dynamic loading experienced by MHK kites, robust structural analysis
行业
发表于 2025-3-31 03:41:52
A Simplified Finite Element Joint Model Updated with Experimental Modal Features,idelity modeling of larger assemblies is often computationally prohibitive, requiring simplification of the model’s complex features. One such feature that is frequently simplified is the bolted joint, which is ubiquitous in engineering structures. However, approximate methods for modeling joints in
领袖气质
发表于 2025-3-31 07:47:47
http://reply.papertrans.cn/88/8738/873721/873721_56.png
Monocle
发表于 2025-3-31 10:20:10
Micromechanics of Internal Frictions in Thermoplastic Composites Exposed to High-Frequency Vibratiocost-saving, and recyclability advantages compared to their thermoset composites. However, their structural performance under high-frequency vibratory loads during their service life is not well understood. Such loads instigate internal material friction inside the microcracks. In this paper, we pro
languor
发表于 2025-3-31 16:22:21
Investigating Compressing Particle Damper Pockets in Beams Manufactured by Laser Powder Bed Fusion owder inside a defined pocket of the part during manufacturing. These pockets of unfused material have inherent damping capabilities that suppress the vibrations and potentially reduce component wear. Particle dampers have been shown to be a simple and effective way to increase the damping of a stru
Hla461
发表于 2025-3-31 17:32:12
http://reply.papertrans.cn/88/8738/873721/873721_59.png
assail
发表于 2025-4-1 00:16:09
http://reply.papertrans.cn/88/8738/873721/873721_60.png