牛马之尿
发表于 2025-3-30 11:56:21
http://reply.papertrans.cn/87/8691/869013/869013_51.png
抱狗不敢前
发表于 2025-3-30 14:25:26
PQ Analysis of T-VSI and ICT-VSI with Their Impacts on 3-P 3-W Utility System, the ICT-VSI is verified by simulations using MATLAB/Simulink environment. Finally, justified the advantages of the ICT-VSI on the base of PQ issues considering the standard value of IEEE-2030-7-2017 & IEC-61000-1 grid code.
vanquish
发表于 2025-3-30 17:24:28
Intelligent Optimization Techniques for Controlling Load Frequency of Interconnected Multiple Sourcntroller‘s parameters with constraints. The ITAE is used as an objective function. The PID Controller kept the deviation of frequency and tie-line power of the MSPS within acceptable limits. A two-area power system comprising of different energy sources was designed using the Simulink tool of MATLAB.
朴素
发表于 2025-3-31 00:23:27
http://reply.papertrans.cn/87/8691/869013/869013_54.png
Inflammation
发表于 2025-3-31 01:02:41
http://reply.papertrans.cn/87/8691/869013/869013_55.png
Intractable
发表于 2025-3-31 08:49:17
http://reply.papertrans.cn/87/8691/869013/869013_56.png
动作谜
发表于 2025-3-31 12:19:47
http://reply.papertrans.cn/87/8691/869013/869013_57.png
Medicaid
发表于 2025-3-31 14:02:40
Role of Controller Zeroes in Stabilizing an Unstable System,put but also by graphical depiction of the change in the pole-zero patterns caused by the tuning technique. The system chosen for the demonstration is an open-loop unstable Maglev system which is gaining prominence in green and environment-friendly transportation and the tuning techniques chosen are Zeigler–Nichols and pole placement techniques.
anaphylaxis
发表于 2025-3-31 21:07:02
2367-3370 dia.Serves as a reference for researchers and practitioners .The book is a collection of best selected research papers presented at International Conference on Smart Technology for Power and Green Energy (STPGE 2022), organized by School of Electrical Engineering, KIIT, Deemed to be University, Bhub
钱财
发表于 2025-4-1 00:54:09
Matrix Magic Shifting to Extract Maximum Power Under Partial Shading Conditions, Shifting (MMS) with conventional configurations (CC). The performance has been evaluated in MATLAB/Simulink environment under six partial conditions. P–V curve, I-V curve, Global maximum power point (GMPP), mismatch loss (ML), fill factor (FF) and efficiency are the parameters used for performance evaluation.