integrated
发表于 2025-3-25 04:36:22
Carbide-Matrix Reactions in Wear Resistant Alloysot only good corrosion resistance, due to the nickel solid solution which often contains chromium, but also high abrasion resistance and a relatively low melting point. Aside from nickel and chromium, most nickel hard alloys contain boron and silicon, and often small amounts of additional carbon and
JOT
发表于 2025-3-25 08:16:35
http://reply.papertrans.cn/87/8626/862594/862594_22.png
打算
发表于 2025-3-25 13:25:08
Ion-Etching Techniques for Microstructural Characterization of Cemented Carbides and Ceramicsnot been very successful. These methods, though simple and convenient, often do not produce adequate contrast for detailed microscopic observation and analysis. Other etching methods such as, ion sputter etching or simply ion-etching, are of a more recent origin. They are principally used in the pre
exostosis
发表于 2025-3-25 17:31:58
28, 1981. The objective of the conference was to review and advance the state of knowledge of the basic physical and chemical properties of hard materials and show how these properties influence performance in a variety of applications. To this end, the 49 con tributed papers and the four keynote p
Progesterone
发表于 2025-3-25 22:08:05
Hardness Measurements in the Evaluation of Hard Materialsare especially relevant to the hardest materials and which would benefit from further research. In particular, we shall be concerned with the implications of anisotropy for our understanding of the effects of varying normal load, temperature, and indentation creep.
强所
发表于 2025-3-26 02:46:46
Mechanical Behavior and Electron Microscopy Analysis of W2C study of plastic deformation of W.C at high temperatures (between 800° and 2200°C). In the present study, electron microscope observations (100 KV and 1 MeV) and results of mechanical deformation tests are associated so as to determine the process responsible for the plastic deformation of W.C.
猜忌
发表于 2025-3-26 08:22:04
Ion-Etching Techniques for Microstructural Characterization of Cemented Carbides and Ceramicsfeasibility of applying ion-etching methods for microstructural characterization of cemented carbides and ceramics is examined. Ion-etching is found to give improved contrast between binder phase grains in cemented carbides as well as reveal macroscopic heterogenieties in certain ceramics.
PLAYS
发表于 2025-3-26 12:07:09
Carbide-Matrix Reactions in Wear Resistant Alloyslow melting point. Aside from nickel and chromium, most nickel hard alloys contain boron and silicon, and often small amounts of additional carbon and iron. Boron is very slightly soluble in nickel. The boride Ni.B forms a low melting eutectic at about 1.000°C with nickel or nickel solid solution.
清洗
发表于 2025-3-26 14:02:13
Binder-Carbide Phase Interactions in Titanium Carbide Base Systemsresence of a Ni-rich liquid phase. Binder Ti and Mo levels were measured using this technique, which has a major advantage over phase separation analysis due to the ability to locate the analysis position with respect to the microstructural components.
抚育
发表于 2025-3-26 20:50:46
Book 1983The objective of the conference was to review and advance the state of knowledge of the basic physical and chemical properties of hard materials and show how these properties influence performance in a variety of applications. To this end, the 49 con tributed papers and the four keynote papers by P