损坏
发表于 2025-3-23 13:24:08
Quantitative Calorimetry and TSA in Case of Low Thermal Signal and Strong Spatial Gradients: Applic response obtained for such a material, the thermal movie has been preliminary filtered. The experimental stress field obtained from the Thermoelastic Stress Analysis (TSA) is well correlated to the finite element model. It validates both the use of this experimental technique to study the thermoela
CREST
发表于 2025-3-23 14:03:40
http://reply.papertrans.cn/83/8283/828203/828203_12.png
抱怨
发表于 2025-3-23 20:17:54
Calorific Signature of PLC Bands Under Biaxial Loading Conditions in Al-Mg Alloys,rimetric signature accompanying the formation and propagation of Portevin-Le Chatelier (PLC) bands induced by such a loading condition. Full kinematic and thermal fields on the specimen surface were characterized by using Digital Image Correlation (DIC) and infrared thermography (IRT). Heat source f
erythema
发表于 2025-3-24 02:00:59
How Does Cristallizable Rubber Use Mechanical Energy to Deform?,per aims at determining the physical origin of such mechanical energy dissipation. For that purpose, temperature variations are measured by using infrared thermography during cyclic uniaxial tensile tests at ambient temperature. Heat sources (heat power densities) produced or absorbed by the materia
弓箭
发表于 2025-3-24 04:48:22
http://reply.papertrans.cn/83/8283/828203/828203_15.png
heckle
发表于 2025-3-24 08:20:01
Crystal Plasticity Parameter Identification by Integrated DIC on Microscopic Topographies,n beam (FIB) and contains two ferritic grains. Four experimental tools are integrated to identify the material’s crystal parameters: (i) an optical confocal microscope captures height profile images, (ii) an in-situ tensile stage prescribes the loading history to the macro-specimen, (iii) a global D
NAVEN
发表于 2025-3-24 11:15:07
http://reply.papertrans.cn/83/8283/828203/828203_17.png
陈列
发表于 2025-3-24 14:59:18
http://reply.papertrans.cn/83/8283/828203/828203_18.png
habitat
发表于 2025-3-24 20:51:35
Optical Analysis of Residual Stress with Minimum Invasion,lded aluminum alloy specimen (tungsten arc bead-on-plate welding on a 100 × 20 mm plate of 5 mm thick) at loading levels up to 20 % of the yield stress, and the acceleration field is evaluated from subtraction of the displacement fields taken in two consecutive time steps. Based on our previously pr
甜瓜
发表于 2025-3-24 23:46:04
Determination of Constitutive Properties in Inverse Problem Using Airy Stress Function,graphite/epoxy laminated composite loaded vertically by processing measured values of .-displacement component with an Airy stress function in complex variables. Displacements are recorded using digital image correlation. The traction-free conditions on the symmetrically located sided notches are sa