幸福愉悦感
发表于 2025-3-25 03:21:37
Production Planning of Flexible Manufacturing Systems Using an Efficient Multiobjective Function Co we have considered randomly different sequence of operations on different machines, that is, operation index and machine index, and the objective function values are calculated. In the second step, the values of objective function are calculated if a particular machine is not working for manufactur
强行引入
发表于 2025-3-25 07:31:53
http://reply.papertrans.cn/83/8235/823476/823476_22.png
蚊子
发表于 2025-3-25 13:36:54
Study and Analysis of Blended Fuel on Single-Cylinder Naturally Aspirated Diesel Engine with Biofuen a diesel engine with different EGR percentage ratios (10, 15, and 20%). In this analysis emission, performance parameters and exhaust gas temperature are measured and compared with two biofuels. In this study compared with neat diesel, EGR shows a better improvement on NOx level and performance levels are greasy.
情感
发表于 2025-3-25 16:32:53
http://reply.papertrans.cn/83/8235/823476/823476_24.png
赦免
发表于 2025-3-25 23:14:59
http://reply.papertrans.cn/83/8235/823476/823476_25.png
友好
发表于 2025-3-26 02:42:15
Thermal Analysis of Drilled and Slotted Brake Rotors,ing software Solidworks and ANSYS. Depending upon the usage and purpose, we compare namely two types of brake rotors, drilled and slotted, and suggest where it can be put into use for maximum output by studying its thermal analysis (heat generated) without any structural failures in both the rotors.
CHASE
发表于 2025-3-26 07:23:17
Combustion and Emission Behaviour of Honge Biofuel in a Thermal Barrier Coated Diesel Engine Suitablier heat release rate at 4°CA BTDC than diesel in coated engine. Emission reduction of CO, HC and smoke of about 50, 26.5 and 20% was attained for blend B15 compared with diesel and other biodiesel blends at 230 bar. NO. and CO. emissions were high for Honge biodiesel fuels.
解脱
发表于 2025-3-26 11:29:34
http://reply.papertrans.cn/83/8235/823476/823476_28.png
coagulate
发表于 2025-3-26 14:36:01
http://reply.papertrans.cn/83/8235/823476/823476_29.png
魔鬼在游行
发表于 2025-3-26 17:56:05
Experimental Investigation of Ball Burnishing Process Parameters Optimization for Al 5083 Using Tagriment: burning feed, burning rate, and material composition. The response parameters are hardness and roughness of the surface. The main objective of this study is to compare surface roughness and surface hardness values on a workpiece of 100% aluminum alloy and aluminum (99%, 98%) with zirconium (+1%, +2%).