轨道
发表于 2025-3-23 11:31:24
http://reply.papertrans.cn/83/8235/823475/823475_11.png
明智的人
发表于 2025-3-23 17:00:11
Reduction of Greenhouse Gases from a Coated Diesel Engine Fuelled with Honge Biodiesel for Sustainaxamined. The engine combustion chamber components including inlet and exhaust valves, cylinder head, and piston crown were coated with YSZ ceramic material over nickel aluminium alloy bond coat for 250 µm thickness. Test results exhibited that in the coated engine, fuel blend B15 emitted significant
FIG
发表于 2025-3-23 19:24:17
http://reply.papertrans.cn/83/8235/823475/823475_13.png
Infantry
发表于 2025-3-23 22:26:38
Modeling and Analysis of Compression Ignition Engine Performance and Emissions of Biodiesel,ning, high lubricity, low environmental impact, derived from vegetable oils, and could be used directly in diesel engines without requiring extensive engine modifications. The major objective of the present work is to investigate the engine performance and exhaust emissions of variable compression r
发酵
发表于 2025-3-24 03:44:33
Simulation of Performance of Boiler System for a Bagasse Unit Using LabVIEW,y the sugar industries on a large scale in India. The cogeneration plants use the bagasse produced by the sugar industries to generate power. Boiler system forms one of the primary components of the cogeneration plant. Designing a virtual model of the boiler system will help to model optimal systems
lactic
发表于 2025-3-24 09:36:37
Experimental Investigation of Performance, Emission and Combustion Characteristics of a Di-diesel Em oxide nanoparticles (ACONP) and aqueous aluminium oxide nanoparticles (AAONP) as an additive in diesel, ethanol and surfactant blended fuel and were compared with diesel fuel. Blends were prepared by in proportions of Diesel 83%, Ethanol 15% and Surfactant 2% (Span 80) with 50 and 75 ppm aqueous c
PURG
发表于 2025-3-24 11:08:41
Emission Characteristics of CSOME in CRDI Diesel Engine with Multiple Injection Strategy,emissions are less from diesel engines compared to its counterpart gasoline engine. But NO and PM (smoke) emissions are higher due to heterogeneous combustion. Simultaneous reduction of NO. and smoke became a tough task faced by researchers to comply with the stringent emission regulations imposed u
albuminuria
发表于 2025-3-24 17:06:31
Impact of Process Parameters on Peak Temperature Inside the Workpiece During Friction Stir Weldingmap of experiments was finished on universal milling. The process parameters are probe revolving velocity of 710, 900, and 1200 rpm, the cross speed of at 20, 30, and 40 mm/min were used. The pin geometry of tool was taper threaded profile. The samples were prepared for microstructure analyses, Roc
灌溉
发表于 2025-3-24 22:28:46
http://reply.papertrans.cn/83/8235/823475/823475_19.png
Arboreal
发表于 2025-3-25 01:19:16
http://reply.papertrans.cn/83/8235/823475/823475_20.png