吞没
发表于 2025-3-28 17:38:01
http://reply.papertrans.cn/83/8229/822874/822874_41.png
骚扰
发表于 2025-3-28 21:39:40
Surface Composite AA6061/SiC Manufactured by Hole and Groove Method Friction Stir Processingacture aluminum-based surface composites containing silicon carbide (SiC) particles, in the current study. SiC particles were reinforced into the AA6061 matrix by both hole and groove method FSP. The effect of the hollow cavity pattern used for particle reinforcement before processing was studied on
Mutter
发表于 2025-3-29 00:06:25
Reliability Analysis of Car Subsystem by Weibull Two Parameter AnalysisThe fault identification method was adopted and utilized to collect the required data from a private service station. The data were further categorized on the basis of kilometres travelled such as up to 25,000 km, 25,001–50,000 km and 50,001–75,000 km. The speed of 60kmph speed considered as time fu
FAST
发表于 2025-3-29 04:57:54
A Review of Challenges to Hastelloy – C Series Weld Overlayindustries. Hastelloy – C series of alloys has been one of the least studied and understood classes of materials. The purpose of this studied is to understand and compare the performance of Hastelloy – C series nickel–chromium–molybdenum alloys with the view of metallurgical, mechanical, and physica
conjunctivitis
发表于 2025-3-29 07:53:34
Analysis of Dimensional Accuracy of ABS M30 Built Parts Using FDM Processi-molten state. These filaments are pushed out from the nozzle’s orifice for fabricating the required components. Henceforth, it is essential to comprehend the governing factors that influence the quality of FDM products. In this context, the FDM process parameters have been tuned, and an attempt is
高度表
发表于 2025-3-29 12:18:18
Reduction of Scrap and Rework Cost by Implementing 5S Methodology: A Case Studyp and rework generation because of improper workplace organization and inappropriate treatment of raw materials as well as finished goods. Due to rework problems, the overall quality of the product is also compromised. Such problems hike the overall manufacturing cost resulting in a thin profit marg
OATH
发表于 2025-3-29 18:26:09
Grain Refinement and Improvement in Microhardness of AZ91 Mg Alloy Via Friction Stir Processinger in the solid state. In this article, FSP with different process parameters on die-cast AZ91 Mg alloy was investigated for microstructure, grain size and microhardness and compared with untreated die-cast AZ91 magnesium alloy. Untreated die-cast AZ91 Mg alloy showed a dendritic structure having pr
Ergots
发表于 2025-3-29 22:38:52
Effect of Number of Passes and Pass Directions in Friction Stir Processing of Coppertal processing technique for manufacturing fine-grained structures. The project’s main goal was to determine the outcome of change in the number of passes and pass direction on the grain size and microstructure. The change in microstructure is accompanied by changes in properties like grain structur
使苦恼
发表于 2025-3-30 00:57:13
http://reply.papertrans.cn/83/8229/822874/822874_49.png
PAD416
发表于 2025-3-30 05:47:41
http://reply.papertrans.cn/83/8229/822874/822874_50.png