羞辱
发表于 2025-3-28 16:13:49
Parametric Optimization for Material Removal Rate During Face Milling: Using Experimental and Mathety (CV), depth of cut (DOC), feed per tooth (FPT), coolant flow rate (CFR), nozzle tool distance (NTD), and nozzle elevation angle (NEA) affect MQL face milling of the substrate with titanium nitride-coated carbide inserts. To establish a mathematical model and recognize the significant process fact
LINES
发表于 2025-3-28 19:49:15
Performance Prediction of Electrode Materials on Surface Roughness During Electric Discharge Machinmotive, biomedical, and marine applications in today‘s industrialized world. In the automotive industry, HSLA steel offers a fantastic opportunity to reduce weight while maintaining strength. The primary applications for HSLA steel include oil pipelines, construction equipment, and road vehicles. Wi
键琴
发表于 2025-3-29 02:23:20
Effect of Sodium Hydroxide Molarity on the Properties of Metakaolin-Eggshell-Based Geopolymer Curedine activators. The commonly adopted methods of curing geopolymer concrete are oven curing, ambient curing, steam curing. It has been discovered that oven curing provides higher mechanical strength. However, oven curing method is limited to precast structures, in other to develop a geopolymer concre
古老
发表于 2025-3-29 06:44:23
A Selection of Renewable Energy Using Three-Phase Hybrid Fuzzy Model to Attain Sustainable Developminable use of the energy resources is one of the goals of the 17 SDGs. The world is facing energy crisis due to the limited access of non-renewable sources of energy. The Renewable Energy Source (RES) can help us in overcoming the problems of energy needs. The Goal 7, i.e. “Affordable and Clean Ener
冷峻
发表于 2025-3-29 10:25:11
http://reply.papertrans.cn/83/8229/822871/822871_45.png
Ondines-curse
发表于 2025-3-29 12:35:18
Numerical Investigation of Fluid Flow and Heat Transfer in Microchannel Heat Sink with Rectangular at transfer improves the thermal rating, and life of the component and also saves energy. A detailed investigation was carried out to investigate the thermos-hydrodynamic properties of a fluid in a microchannel operating under laminar flow regime. The numerical simulations were carried out at differ
Acumen
发表于 2025-3-29 16:46:18
http://reply.papertrans.cn/83/8229/822871/822871_47.png
创新
发表于 2025-3-29 20:50:51
http://reply.papertrans.cn/83/8229/822871/822871_48.png
PTCA635
发表于 2025-3-30 01:25:27
Experimental Investigation and Its Parametric Analysis of AWJM Process Parameters on Surface Qualitrough an experimental investigation and parametric analysis. Experiments are conducted-based Taguchi (L27) OA by varying AMGS, SoD, NS, AMFR & WP, and the corresponding responses like surface quality (Ra) are measured. Thereafter, effect of process parameters and most optimal combinations for AWJM p
DRILL
发表于 2025-3-30 06:50:30
Investigations to Examine the Potential of Eco-Safe Nanofluids in CNC Machining,persions in two types of biodegradable oils. Before machining, the nanofluids are formulated at 4% from 0.25 to 1% to test basic properties, namely thermal conductivity and absorbance. These tests are followed by machining at fixed cutting conditions through minimal quantity lubrication technique at