AXIOM
发表于 2025-3-25 06:29:24
Investigations to Examine the Potential of Eco-Safe Nanofluids in CNC Machining,nging down temperatures, forces, surface coarseness, and tool run out by 60% compared to dry machining, 35% better than SAE oil, 25% better than pure oils, and 15% better than nMoS.-based cutting fluids, respectively, on an average.
fixed-joint
发表于 2025-3-25 07:56:08
http://reply.papertrans.cn/83/8229/822871/822871_22.png
幸福愉悦感
发表于 2025-3-25 12:22:39
http://reply.papertrans.cn/83/8229/822871/822871_23.png
详细目录
发表于 2025-3-25 18:11:23
,Improvement of Microstructure and Mechanical Properties of Powder Coating on Ti-6al-4 v Alloy with columnar grain microstructure was formed for all the samples containing RE’s oxides, and short columnar grains and microneedle-type appearances were formed without RE’s oxides. Due to varying currents, the uniform distribution of fine columnar grains had a hexagonal structure, and equiaxed grains we
宣称
发表于 2025-3-25 20:53:04
Concentrating Solar Energy for Community Cooking, case studies for a few of these mega kitchens, viz. Temple of Shirdi, BrahmaKumaris region of Mount Abu. A proper economic analysis will be presented for these community cooking setups, in which their cost savings and effectiveness against traditional fuels like LPG will be shown.
NUL
发表于 2025-3-26 02:30:44
Pin-On-Disk Computational Analysis: A Powerful Tool for Characterizing the Mechanical Properties officant wear to the counter face. The study also highlights that the polymer specimen‘s weight loss may not be a reliable predictor of polymer wear. Therefore, the American Standard Test Method (ASTM-F732) has been established as the benchmark for evaluating candidate materials intended for use as be
impaction
发表于 2025-3-26 05:55:44
http://reply.papertrans.cn/83/8229/822871/822871_27.png
nautical
发表于 2025-3-26 08:31:40
Vibration Energy Harvesting from Cantilever Beam Using Macro Fiber Composite Material, increasing axial force on the simply supported beam so that multiple variations of the configurations can be tested, by imposing and superimposing the different forces acting on the cantilever beams, thus helping to navigate how the setup will perform under different circumstances. The use of Macro
iodides
发表于 2025-3-26 13:49:34
Randhir Kumar,Mukul Anand,Manowar Hussain,Alok Kumar Das
突变
发表于 2025-3-26 19:57:05
http://reply.papertrans.cn/83/8229/822871/822871_30.png