inclusive
发表于 2025-3-30 10:28:40
Multi-response Optimization of Friction Stir Welded Joint of AA6061 Using Hybrid GRA and PC Approach and its alloys in various structural, automotive, aerospace, and defence applications. Herein, multi-objective analysis for achieving the optimized parameters in the welding of a 6061 aluminium alloy sheet of 4 mm thickness was done. The joint is developed by varying the rotational speed, welding s
逃避责任
发表于 2025-3-30 12:37:13
Analysis of Materials Removal in EDM Over Ti-6Al-4V Using Graphite Powder-Mixed Pungai Oilrgical tools. In this paper, materials removal mechanisms on the workpiece as well as the tool have been investigated in PMEDM using graphite powder-mixed pungai (Pongamia or Millettia pinnata) oil. The input parameters namely powder concentration, gap voltage and pulse on-time were considered. Tagu
类人猿
发表于 2025-3-30 17:36:49
Influence of Weld Energy on Microstructure and Mechanical Properties of Ultrasonic Spot Welded Al/Cue typically utilized in lithium-ion battery packs. Electric vehicles employ these materials due to their higher electrical and thermal conductivity. Ultrasonic welding is an energy-efficient process that produces effective bonds rapidly between two dissimilar thin materials. The weld interface tempe
江湖骗子
发表于 2025-3-30 22:33:19
Practical Implications of Lean Manufacturing Implementation Based on Kaizen Suggestions: A Case Studng into account some of the Kaizen standards. In this case study, the published literatures were methodically categorized, analyzed, and addressed within the frames of this case. The regulations in conformance to Kaizen philosophy inside the work area were reviewed, analyzed, and applied adopting th
Brain-Imaging
发表于 2025-3-31 02:58:59
2195-4356 nference STAAAR 2022.Broadens understanding of heat and massThis book consists of select proceedings of the 1st International Conference on Sustainable Technologies and Advances in Automation, Aerospace and Robotics (STAAAR 2022). This book focuses on advancements in the fields of robotics and autom
opprobrious
发表于 2025-3-31 08:32:55
http://reply.papertrans.cn/83/8229/822865/822865_56.png
Agility
发表于 2025-3-31 12:54:23
http://reply.papertrans.cn/83/8229/822865/822865_57.png
听觉
发表于 2025-3-31 16:16:20
Investigation and Optimization of Wire EDM Process Parameters for Inconel 925 Superalloy Using the Ttter material removal rate with good surface quality was discovered as T., whereas T. and SV had no effect on the output parameters. The Taguchi design of the experiment yielded improved machining properties for increased T. when machining the Inconel 925 superalloy.
留恋
发表于 2025-3-31 20:54:55
Lecture Notes in Mechanical Engineeringhttp://image.papertrans.cn/r/image/822865.jpg