悲痛
发表于 2025-3-28 14:44:58
http://reply.papertrans.cn/83/8229/822865/822865_41.png
BROTH
发表于 2025-3-28 19:19:18
http://reply.papertrans.cn/83/8229/822865/822865_42.png
monopoly
发表于 2025-3-28 23:25:18
http://reply.papertrans.cn/83/8229/822865/822865_43.png
痛苦一生
发表于 2025-3-29 03:24:59
Optimization of Kitchen Countertop Dimensions for Indian Populationand standards have been recommended for height and depth of the kitchen countertop. Which is mostly unified for a very wide range of population. Since the dimensional criteria are much more dependent on the local anthropometric data, a wide range of standards cannot be relied up on. In this article,
concubine
发表于 2025-3-29 08:00:00
Manpower Optimisation in Housekeeping Activities Employing MOST: A Methodological Approach for Manufturing organisations targeting the productivity improvement. Any industry‘s primary goal is to enhance the productivity in conformance to the end result of an effective manufacturing process and the cost-effective utilisation of manufacturing resources. The prime focus of this research was on the op
Anticlimax
发表于 2025-3-29 12:16:10
Finite Element Analysis on Coconut Tree Climbing Mechanismity of professional coconut climbers is less. To overcome this difficulty in the current research article, the authors proposed a climbing device which can be climb autonomously, quickly, safely, and efficiently. The developed robot can be capable to control by remotely and also it can climb the cur
精密
发表于 2025-3-29 18:10:55
Identification of Reliability for an Automobile Sub-system Maruti Suzuki Altoed based on fault identification from an automobile service station. The data collection is categorized according to the distance covered by the cars, and this covered distance further converted into time function by considering the speed of cars as 60 km (km)/hour (hr). The data collection was cate
打谷工具
发表于 2025-3-29 20:01:42
Surface Modification by Abrasive Water Jet Milling of Ti-6Al-4V Alloy for Biomedical Applicationcell adherence, spreading, and proliferation at the implant/tissue interface, as they affect the biological response. Several surface texturing technologies have been developed to attain these properties for biomedical applications. These methods have constraints that limit their effectiveness, desp
Negligible
发表于 2025-3-30 03:51:45
http://reply.papertrans.cn/83/8229/822865/822865_49.png
重力
发表于 2025-3-30 04:13:04
Investigation and Optimization of Wire EDM Process Parameters for Inconel 925 Superalloy Using the T was used in a Taguchi design with three parameters, T. (pulse on time), T. (pulse off time), and SV (Spark Gap Voltage) at three levels. Using analysis of variance, influencing process factors were discovered. The optimum parameters for higher material removal rate were 110 μs, T., 60 μs T., and 25