modest 发表于 2025-3-28 18:13:35
The Number of Slots and Electromagnetic Core Effects on Eddy Current Brake Performance: A Computatiod (FEM), where the simulated ECB modeling was varied by 10, 20, and 30 slots using a change in the number of electromagnetic field sources. The results of this study obtained a description of the braking torque with the largest value in the variation of 10 slots using four electromagnets, namely, 59.18 Nm.陈腐思想 发表于 2025-3-28 22:42:15
Cavitation Detection of Centrifugal Pumps Using SVM and Statistical Features, the cavitation increases noise and vibration level, if not properly maintained leads to catastrophic failure and total stop of the whole process. Therefore, it is needed to develop a method that can detect cavitation as early as possible. Recently, pattern recognition-based fault detection is gaini英寸 发表于 2025-3-28 23:46:48
http://reply.papertrans.cn/83/8229/822859/822859_43.pngMeditate 发表于 2025-3-29 04:43:24
http://reply.papertrans.cn/83/8229/822859/822859_44.png意见一致 发表于 2025-3-29 09:17:51
The Influence of the Buttering Layer on the Creep Properties of Ferritic-Martensitic T91 and Austenlar metal welding (DMW) to obtain the joint. The DMW process poses several challenges that are caused by differences in the physical properties of the base metals. In the present work, the effect of the type of filler metals (Inconel ERNiCr-3 and ERNiCrMo-3) and a buttering process on the creep propNADIR 发表于 2025-3-29 12:38:32
http://reply.papertrans.cn/83/8229/822859/822859_46.png施魔法 发表于 2025-3-29 16:45:15
http://reply.papertrans.cn/83/8229/822859/822859_47.png散布 发表于 2025-3-29 21:44:53
Plant Maintenance Budgeting Prioritization Based on Reliability Prediction of Repairable System,this study, the prediction value of the equipment reliability of the gas turbine subsystem was obtained along with the value of . (FC), . (CR), and . (MC) which is then processed further to produce a . (BCR) which is useful for preparing priority rankings for the allocation of very limited maintenannutrients 发表于 2025-3-30 02:24:15
Analysis of the Reduction of Vibration and Chatter Effect in Boring Process Due to the Addition of f chatter remains to be a significant problem. To date, engineers keep referring to the traditional chatter stability lobe to address the problem of limiting themselves in creativity to achieve high efficiency. The research aims to observe the vibration reduction along the boring process achieved byAmylase 发表于 2025-3-30 06:20:51
http://reply.papertrans.cn/83/8229/822859/822859_50.png