轻率看法
发表于 2025-3-26 22:28:51
http://reply.papertrans.cn/67/6654/665312/665312_31.png
高兴去去
发表于 2025-3-27 02:46:33
http://reply.papertrans.cn/67/6654/665312/665312_32.png
arbiter
发表于 2025-3-27 05:21:56
http://reply.papertrans.cn/67/6654/665312/665312_33.png
拔出
发表于 2025-3-27 10:16:52
tion to abrasive wear, oxidation wear and adhesive wear were observed in low load and it changes to abrasive wear at high load. In the ECAPed specimens, at low load transfer of iron particles from the steel disc surface to the specimen surface was identified.
Mortal
发表于 2025-3-27 16:39:40
http://reply.papertrans.cn/67/6654/665312/665312_35.png
放肆的你
发表于 2025-3-27 18:03:35
http://reply.papertrans.cn/67/6654/665312/665312_36.png
Bumptious
发表于 2025-3-27 22:37:15
http://reply.papertrans.cn/67/6654/665312/665312_37.png
Bridle
发表于 2025-3-28 02:34:08
Valeriu Soltandiction accuracy than the traditional method in most cases. It is concluded that the fatigue life is significantly improved by applying the proposed approach to the EMU gear. The results show that it is more corresponded to engineering practice by using the improved fatigue life analysis method than
affluent
发表于 2025-3-28 09:51:09
http://reply.papertrans.cn/67/6654/665312/665312_39.png
Injunction
发表于 2025-3-28 13:00:57
Josue A. Nava-Bello,Ewa Wasilewski,Angelica M. Bello,Alejandro A. Nava-Ocamporowth diagram (FCG) can be taken as . = 4 (I mode), . = 3 (II mode). As a parameter of schematization, it is possible to use the value of SIF at an FCG rate of 10. m/cycle. Its value for steels of rolling rolls can be 60–70 MPa√m in mode I. For mode II, this index decreases by 2.5–3 times.