ANIM
发表于 2025-3-30 10:35:49
Nanoparticle-Based High-, Dielectric Composites: Opportunities and Challenges, and very good stability and functionality, with simultaneous low cost of processing and materials. Usually it is impossible to satisfy all requirements simultaneously; however, different properties can be achieved by application of various technologies, suitable for specified field of application.
博识
发表于 2025-3-30 15:30:55
Nanostructured Resistor Materials,its demands both active devices and passives (primarily resistors, capacitors, and inductors but also nonlinear resistors – thermistors and/or varistors, potentiometers, etc.). The aim of this chapter is to present the current situation in the area of surface and embedded (buried) resistors made wit
手工艺品
发表于 2025-3-30 16:45:21
http://reply.papertrans.cn/67/6609/660857/660857_53.png
Psa617
发表于 2025-3-30 22:19:29
Nano-conductive Adhesives,ielectric properties and thus are electrical insulators. The conductive fillers provide the electrical properties and the polymeric matrix provides mechanical properties. Therefore, electrical and mechanical properties are provided by different components, which is different from metallic solders th
巡回
发表于 2025-3-31 01:36:03
http://reply.papertrans.cn/67/6609/660857/660857_55.png
采纳
发表于 2025-3-31 05:08:57
Nanoparticles in Microvias,), protection of devices from the environment, and electrical interconnection of components. This electrical interconnection enables distribution of both electronic signals and power throughout the package by means of multiple layers of metal circuit traces. Electrical interconnection between layers
Allergic
发表于 2025-3-31 10:13:39
Silver Nanoparticles for Inkjet-Printed Conductive Structures in Electronic Packaging,ritically on subtractive patterning. Printing, a bottom-up process, plays an important role in this production, especially when nanomaterials are printed. There are many areas in which such printing is used , but only electrically conductive structures in electronic packaging are the object of in
新义
发表于 2025-3-31 16:10:29
A Study of Nanoparticles in SnAg-Based Lead-Free Solders,tting behavior on several substrate platings such as Cu, Ag, Pd, and Au. Recently, due to environmental and health concerns, a variety of new lead-free solders have been developed. Lead-free solders lack the toxicity problems associated with lead-contained solders. However, unlike lead solders, the
nuclear-tests
发表于 2025-3-31 21:11:17
Nano-underfills and Potting Compounds for Fine-Pitch Electronics,damage interconnects. Mechanical shock during operation may subject the board assemblies to large out-of-plane deformation. Underfills and potting compounds are often used to enhance the harsh environment reliability of electronics through addition of supplemental restraints to allow for increase in
刺激
发表于 2025-3-31 23:21:41
Carbon Nanotubes: Synthesis and Characterization,echnology.” Carbon nanotubes (CNTs) represent a distinct group of nanostructures of relatively few nanometers in diameter and micrometers in length with unique physical and chemical properties. Structurally based on number of graphitic layers, CNTs are classified as single-walled (SWCNTs) and multiw