形状
发表于 2025-3-26 22:40:36
The Mold/Casting Interface Phenomena,tective coating during pouring liquid metal are often due to the cause of the so-called gas porosity. The rate of the evolution of gases from the mold and cores, and their volume depends strongly on the binder used. Air present in the mold cavity may also be the cause of porosity.
GRACE
发表于 2025-3-27 04:07:48
http://reply.papertrans.cn/64/6336/633509/633509_32.png
Grievance
发表于 2025-3-27 06:43:37
http://reply.papertrans.cn/64/6336/633509/633509_33.png
affect
发表于 2025-3-27 12:30:09
http://reply.papertrans.cn/64/6336/633509/633509_34.png
Postmenopause
发表于 2025-3-27 14:54:43
Phenomena Model on the Mold/Casting Interface,ular and compacted/vermicular graphite, or decarburization of the casting surface layer, or the appearance of areas of pearlitic/ferritic rim. Several mechanisms are responsible for the formation of abnormal surface layer on the CGI and SGI castings, which are associated with a reduction in the conc
沙文主义
发表于 2025-3-27 19:09:54
Book 2015sis and thermodynamic calculations, which were carried out on the reactions occurring in the study area..Providing a valuable resource to academics and researchers interested in materials science, metal casting and metallurgy, this book is also intended for metal industry professionals..
遗留之物
发表于 2025-3-27 22:32:46
Microstructure and Properties of Ductile Iron and Compacted Graphite Iron CastingsThe Effects of Mold
隐士
发表于 2025-3-28 04:43:08
http://reply.papertrans.cn/64/6336/633509/633509_38.png
reflection
发表于 2025-3-28 09:34:08
http://reply.papertrans.cn/64/6336/633509/633509_39.png
免除责任
发表于 2025-3-28 12:46:23
978-3-319-14582-2The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl