结果
发表于 2025-3-23 09:59:13
Micro and Nano Machining of Engineering Materials978-3-319-99900-5Series ISSN 2195-0911 Series E-ISSN 2195-092X
放弃
发表于 2025-3-23 15:00:40
http://reply.papertrans.cn/64/6328/632729/632729_12.png
Fillet,Filet
发表于 2025-3-23 21:39:46
http://reply.papertrans.cn/64/6328/632729/632729_13.png
正论
发表于 2025-3-23 22:44:28
Recent Trends in Micro and Nano Machining of Engineering Materialsexpectations of the micro and nano industries. Although the material database has grown tremendously, machining of the new materials with the traditional has posed a major challenge, thereby restricting their applications to their applicability to the nano and micro industries. To overcome such chal
要控制
发表于 2025-3-24 03:32:29
http://reply.papertrans.cn/64/6328/632729/632729_15.png
BROTH
发表于 2025-3-24 08:23:20
Micromachining of Titanium Alloyscellent mechanical properties, and outstanding corrosion resistance. Although many of the current industrial applications of titanium alloys are at a larger scale, they can be used for microscale applications as well, especially where lightweight, and biocompatibility of titanium alloys are advantag
Rodent
发表于 2025-3-24 12:52:35
Ultra-precision Diamond Turning Processduce highly precise surface with complex shapes and micro-features. Surface quality in ultra-precision machining is only assured by strictly following the optimized process conditions. This chapter covers the various stages of the ultra-precision diamond turning process especially considering the pr
热心
发表于 2025-3-24 18:35:47
Abrasive Waterjet Cutting of Lanthanum Phosphate—Yttria Composite: A Comparative Approach. composite in Abrasive Waterjet Machining (AWJM). The output responses, namely, Material Removal Rate (MRR), Kerf Angle (KA) and Surface Roughness (Ra) are measured with varied input parameters of Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS). MRR and KA are found to be high
osteocytes
发表于 2025-3-24 20:15:15
http://reply.papertrans.cn/64/6328/632729/632729_19.png
亲爱
发表于 2025-3-24 23:39:27
Recent Trends in Micro and Nano Machining of Engineering Materialsiques, the present chapter discusses important micro machining processes such as electrical discharge machining (EDM), electrochemical machining (ECM), abrasive water-jet machining (AWJM), and laser beam machining (LBM). A brief section on recent trends in nano-machining has also been presented at the end of the chapter.