CRAB
发表于 2025-3-27 00:53:15
http://image.papertrans.cn/m/image/631468.jpg
Indurate
发表于 2025-3-27 05:12:21
978-3-030-26049-1Springer Nature Switzerland AG 2019
Nonflammable
发表于 2025-3-27 07:30:15
http://reply.papertrans.cn/64/6315/631468/631468_33.png
罐里有戒指
发表于 2025-3-27 12:21:01
http://reply.papertrans.cn/64/6315/631468/631468_34.png
transient-pain
发表于 2025-3-27 16:23:20
Experimental Analysis of Cast Iron Drilling with Dry and MQL Conditions,focused on deep-hole drilling (without pecking cycle) of nodular irons under various MQL conditions. All tested are conducted with the state-of-the-art coated solid WC-Co drills. Detailed experimental methods and key results are presented.
巩固
发表于 2025-3-27 21:18:40
Advancement of Surgical Bone Drills: A Case Study of Notched K-Wires,ixation. The heating problem of K-wires is due to the solid trocar design without cutting flutes to remove and evacuate bone debris. The design and manufacturing method, and the experiment study are presented in this chapter.
让空气进入
发表于 2025-3-27 23:05:07
http://reply.papertrans.cn/64/6315/631468/631468_37.png
吹气
发表于 2025-3-28 04:56:19
Thermal Analysis of Bone Drilling in Orthopaedic Surgery,investigates the sequential drilling of bone using a clinically relevant environment. The heat generated by standard drills has been studied, including the effects of the drill diameter, speed, and feed rate. The experimental methods, sample preparation, and analysis method for cadaveric bone drilling are elaborated.
摇曳
发表于 2025-3-28 06:16:19
Model-Based Approach for Predicting Thermal Damage in Bone Drilling,necrosis. This chapter presents a 3D finite element thermal model, based on the previous chapters, and a thermal damage criterion to estimate necrosis in bone drilling, particularly for sequential, multiple hole drilling in bone.
Hdl348
发表于 2025-3-28 11:31:14
Modeling of Drill Temperature and Thermal Stress in Drilling of Titanium Alloys,rature inside the drill. The inverse heat transfer method with the combination of experimental measurement and numerical modeling is presented in this chapter to find the drill temperature during drilling.