MOT
发表于 2025-3-28 15:02:08
978-3-030-29992-7Springer Nature Switzerland AG 2020
Exposure
发表于 2025-3-28 19:38:44
Mechatronics 2019: Recent Advances Towards Industry 4.0978-3-030-29993-4Series ISSN 2194-5357 Series E-ISSN 2194-5365
mucous-membrane
发表于 2025-3-28 23:14:17
https://doi.org/10.1007/978-3-030-29993-4Intelligent Systems; Mechatronics; Robotics; Mechatronic Solutions; Mechatronics 2019
Obscure
发表于 2025-3-29 04:02:47
http://reply.papertrans.cn/63/6289/628827/628827_44.png
semiskilled
发表于 2025-3-29 07:23:45
http://reply.papertrans.cn/63/6289/628827/628827_45.png
grotto
发表于 2025-3-29 13:31:33
Selected Tests of a Control System for an Articulated Vehicle with Innovative Articulationan 0.1 s. Moreover, this delay should be monitored and used as an input to the control algorithm, as in certain conditions deactivating the articulation damping in presence of excessive delays can be confusing to the driver.
愤慨一下
发表于 2025-3-29 16:36:49
Verification of Selected Gait Parameters Derived from Inertial Sensors Using Simple Smartphone Basedalculated. They have been compared with data obtained from IMU..It was found that time parameters of gait like step time, gait cycle time, stance phase, swing phase and cadence were correctly determined from data obtained from IMUs.
condemn
发表于 2025-3-29 23:37:59
Methods of Joint Stiffness Measurement Using a Manually Actuated Dynamometerregression lines, three values of joint stiffness are obtained. Angular velocity of the rotational movement in a joint is the result of movement affected by a manually controlled lever of dynamometer. No statistically significant difference in joint stiffness values was identified, when comparing va
事先无准备
发表于 2025-3-30 01:48:40
2194-5357 ted here will benefit both scientists and engineers looking for solutions to specific industrial and research problems..978-3-030-29992-7978-3-030-29993-4Series ISSN 2194-5357 Series E-ISSN 2194-5365
Osteoarthritis
发表于 2025-3-30 07:21:49
Mechatronics 2019: Recent Advances Towards Industry 4.0