STALE
发表于 2025-3-25 04:36:28
Structural Synthesis of 2R1T Type Mechanisms for Minimally Invasive Surgery Applicationsnt at the incision port on the patient’s body, so the manipulator should have a remote center of motion. This study presents the structural synthesis of a non-parasitic 3-dof manipulator with 2R1T motion pattern to be used as a remote center of motion mechanism for minimally invasive surgery applica
sed-rate
发表于 2025-3-25 10:32:57
http://reply.papertrans.cn/63/6288/628782/628782_22.png
样式
发表于 2025-3-25 13:22:21
A Spatial Four-Bar Linkage RSPS for Ball-Bar to Test R-pairture. The spatial four-bar linkage RSPS is comprised of a ball-bar with three kinematic pairs S-P-S and an actual R-pair measured. The outputs of RSPS corresponds to the distance between two master balls’ centers, and the assembly errors of the ball-bar instrument are concisely contained in the outp
Synapse
发表于 2025-3-25 16:11:55
Leg Mechanisms Motion Characteristicsnd Stephenson linkages with two loops are presented. The method may be also applied in the same purpose to the forty linkages with three independent loops and four degrees of freedom. There are also presented some synthesis aspects for bi-mobile and three-mobile systems.
饰带
发表于 2025-3-25 23:33:35
Design and Dimensional Optimization of a Novel Walking Mechanism with Firefly Algorithm analysis is done that will be used for the synthesis problem. Furthermore, constraints and an objective function are obtained from kinematic analysis. Then, these constraints are implemented to the Firefly Algorithm and dimensional parameters are obtained for a desired step profile. Finally, these
闲聊
发表于 2025-3-26 03:04:01
http://reply.papertrans.cn/63/6288/628782/628782_26.png
rectum
发表于 2025-3-26 05:10:36
Assessment of the Rolling Contact Fatigueperimental testing of the rolling contact fatigue is time consuming and this article deals with the description of the most suitable methods for a fast and easy assessment of rolling contact fatigue. This information can lead to understanding and explaining what happens when rolling contact fatigue
曲解
发表于 2025-3-26 10:23:02
The Stress Distribution in the Contact Region of a Cam Mechanism General Kinematic Pairnematic pair is formed from the contact of the working surfaces of a cam and a follower. In the operation of cam mechanisms, fatigue damage of the contact surfaces of the cam and the follower may appear. This damage is in the form of pitting that develops from cracks on the surface of the active are
Nmda-Receptor
发表于 2025-3-26 16:32:06
http://reply.papertrans.cn/63/6288/628782/628782_29.png
omnibus
发表于 2025-3-26 18:27:48
http://reply.papertrans.cn/63/6288/628782/628782_30.png