变白
发表于 2025-3-30 08:25:31
Fatigue Characterization of 3D-Printed Maraging Steel by Infrared Thermography, us to extract the heat power density corresponding to the mechanical dissipation caused by fatigue. The study was performed on specimens featuring a specific geometry and printed with different process parameters. Distinguishing differences in the production of mechanical dissipation at the beginni
拾落穗
发表于 2025-3-30 14:36:34
http://reply.papertrans.cn/63/6285/628425/628425_52.png
corn732
发表于 2025-3-30 20:25:24
Mechanical Characterization of Cellulose Nanofibril Materials Made by Additive Manufacturing,noindentation and tensile testing. Nanoindentation is used primarily to map the mechanical properties and examine variations in properties spatially and through the thickness. Tensile testing, with strain measurement via digital image correlation, is used to characterize the bulk properties. Mechani
Delude
发表于 2025-3-30 23:24:18
http://reply.papertrans.cn/63/6285/628425/628425_54.png
赞成你
发表于 2025-3-31 01:20:25
http://reply.papertrans.cn/63/6285/628425/628425_55.png
显示
发表于 2025-3-31 08:42:56
http://reply.papertrans.cn/63/6285/628425/628425_56.png
尊严
发表于 2025-3-31 09:39:35
Effect of Processing Parameters on Interlayer Fracture Toughness of Fused Filament Fabrication Ther cooling-fan speed. FFF test blocks were fabricated to identify which parameters would best optimize interlayer fracture toughness. To measure interlayer fracture toughness, unidirectional ABS double cantilever beam specimens were fabricated according to the parametric test matrix with guidance from
思想
发表于 2025-3-31 13:51:34
http://reply.papertrans.cn/63/6285/628425/628425_58.png
迫击炮
发表于 2025-3-31 18:47:00
Computational and Experimental Characterization of 3D Printed Components by Fused Deposition Modeli of geometrical accuracies/distortions as a function of process parameters. The knowledge gained from NDT results is used for tuning our computational models. Representative results demonstrate the feasibility of the proposed computational-experimental approach for potential implementation into FDM
禁止,切断
发表于 2025-4-1 01:05:27
http://reply.papertrans.cn/63/6285/628425/628425_60.png