construct
发表于 2025-3-28 15:02:38
http://reply.papertrans.cn/63/6284/628378/628378_41.png
objection
发表于 2025-3-28 18:51:58
Shaping of Surface Layer Structure and Mechanical Properties After Laser Treatment of Aluminium Allective of this investigation was to improve the tribological and mechanical properties of the surface layer of the aluminium alloy AlMg5Si2Mn by remelting and feeding the chromium particles into the melt pool with a rapid solidification. The applied size of the chromium particles have been in the ra
语言学
发表于 2025-3-29 02:23:39
On Shearography Testing of Tires Separations,ynamic loading. 12 pieces of tires with the dimensions of 225/75 R 16 C with the same tread pattern were manufactured for the test in order to examine the impact on the material and design changes on the spread of separations in a tire. The atlas of separation is presented. The results of separation
opportune
发表于 2025-3-29 03:41:26
http://reply.papertrans.cn/63/6284/628378/628378_44.png
纠缠,缠绕
发表于 2025-3-29 09:01:38
http://reply.papertrans.cn/63/6284/628378/628378_45.png
现任者
发表于 2025-3-29 12:01:47
Modelling of the Roughness Profile by Means of the Autoregressive Type Stochastic Processes,e. Obtained results, usually in the form of the statistical parameters’ set are used for the surface machining evaluation as well as the forecast of the tribological behavior of the surface. The second mentioned purpose demands a particularly well suited mathematical model to accomplish a quantitati
fastness
发表于 2025-3-29 18:42:38
Drainage Concrete Based on Cement Composite and Industrial Waste,inly from primary natural resources. The continuous reconstructions and modernizations of already built-up areas are the cause of the production of construction waste which, for example, in Europe represents ¼ of the volume of all waste materials. Such a trend is inconsistent with sustainable develo
Germinate
发表于 2025-3-29 20:41:18
Numerical Analysis of Impact Behavior of Rotary Centrifuge Guarded Body,ies are 25 m/s, 50 m/s and 270 m/s and the impact attitudes are 0° and 45° respectively. Stress fields and failure modes of the guarded body, cavity wall, cover and rotary components are obtained. It indicates that the cavity wall can withstand impact action. The deformation of the cavity wall and c
Bmd955
发表于 2025-3-30 01:40:59
Capillary Active Insulations Based on Waste Calcium Silicates,. This article describes the properties of the developed material structures built on cement composites with a defined inner surface using industrial waste materials containing aluminosilicates. The article presents the structures containing fly ashes from heating plants improving the rheological pr
小虫
发表于 2025-3-30 06:02:01
Comparison of Some Structural and Stainless Steels Based on the Mechanical Properties and Resistancof materials selection. In accordance with this fact, this paper presents and analyzes the experimental results relating to two structural (1.0044, 1.7228) and two stainless steel (1.4305, 1.4122) materials. Stress-strain diagrams as well as creep curves related to short-time creep are presented. Ac