Entropion
发表于 2025-3-26 23:42:14
http://reply.papertrans.cn/63/6284/628378/628378_31.png
harangue
发表于 2025-3-27 02:41:46
V. Marušić,I. Lacković,L. Marušićformation about this famous river is in a scattered form and reproduced from unverified sources. This contributed volume is the first multi-author volume publication on this subject. The River Ganga includes a vast array of topics written by several authors of distinction. Topics include; hydrology,
知道
发表于 2025-3-27 06:46:57
http://reply.papertrans.cn/63/6284/628378/628378_33.png
cardiac-arrest
发表于 2025-3-27 09:56:55
http://reply.papertrans.cn/63/6284/628378/628378_34.png
cluster
发表于 2025-3-27 17:31:55
http://reply.papertrans.cn/63/6284/628378/628378_35.png
祝贺
发表于 2025-3-27 18:57:06
Effect of Alloying Elements on Corrosion, Microstructure and Mechanical Properties for Casted Free- of appropriate mixtures of the alloying elements, Ferro-alloys and Ferro-alloys bearing nitrogen were melted in an induction furnace under nitrogen pressure. Even though the resistance to the pitting attack was controlled and enhanced by the nitrogen addition as well as, chromium, molybdenum conten
敲竹杠
发表于 2025-3-28 01:29:00
Influence of Al2O3 Nano-dispersions on Mechanical and Wear Resistance Properties of Semisolid Cast lloy. Alumina nano-powder of 40 nm size was stirred into the A356 matrix with different fraction ratios ranging from (0, 1, 2 and 4 wt%) in a mushy zone (600 °C) using a constant stirring time for one minute. To evaluate the results, the alloys were further characterized by various tribological and
Aqueous-Humor
发表于 2025-3-28 02:38:32
Evaluation of Mechanical Properties of Natural and Synthetic Rubber Material,d mechanical tests of natural and synthetic rubber in various environmental conditions. The hardness, elongation, stress-strain relation, dynamic properties, and the nonlinear material constants that are necessary for a finite element analysis were determined through uniaxial tension, equi-biaxial t
创作
发表于 2025-3-28 08:30:19
http://reply.papertrans.cn/63/6284/628378/628378_39.png
obnoxious
发表于 2025-3-28 12:17:15
Application of the Finite Element Method for Modelling of the Spatial Distribution of Residual Stre modelling of obtained coatings using the finite element method (FEM). In order to identify the structure and fractures of the analysed surface coatings, investigations using the scanning electron microscope Zeiss Supra 35 were performed. Evaluation of the adhesion of the PVD/CVD coatings was carrie