五行打油诗
发表于 2025-3-25 04:06:19
Quality Prediction of Hot Rolled Products and Optimization of Continuous Casting Process Parameters asting slab severely limits the development of the continuous casting-rolling technology. In this paper, based on big data mining technology, the quality prediction model for hot rolled coils and the corresponding optimization method for continuous casting parameters were proposed. Firstly, the GA (
不公开
发表于 2025-3-25 09:50:32
http://reply.papertrans.cn/63/6258/625794/625794_22.png
Immunotherapy
发表于 2025-3-25 13:36:07
http://reply.papertrans.cn/63/6258/625794/625794_23.png
机制
发表于 2025-3-25 19:04:33
Fluctuant Solidification Behavior in the Centerline of Continuous Casting Billets Based on Numericald to the centerline segregation defect, will significantly affect the central quality uniformity along the casting direction. Meantime, the fluctuation phenomenon of the solidification end point during the continuous casting process is still unclear. In this work, the solid fraction in the centerlin
insomnia
发表于 2025-3-25 22:22:16
Toward Meso-scale Modelling of Slag Foaming Phenomena in Pyrometallurgystries. In pyrometallurgical smelting, these may manifest in the form of decoupling of gases from one of the molten phases. This can cause slag foaming, which occurs when gas bubbles are unable to escape from the viscous slag rapidly enough and a low-density foam layer builds up at the surface of th
ectropion
发表于 2025-3-26 00:29:55
Simulation on the Slag Desulfurization During the LF Refining in a Gas-Blowing Ladleontent in the molten steel. The VOF, k-ε, and DPM models were employed to simulate the fluid flow of three phases in the ladle furnace, including the steel, the slag, and the air. Reactions between the steel and the slag were considered in the simulation using a series of user defined functions. The
工作
发表于 2025-3-26 06:07:34
http://reply.papertrans.cn/63/6258/625794/625794_27.png
圆桶
发表于 2025-3-26 11:43:43
http://reply.papertrans.cn/63/6258/625794/625794_28.png
choleretic
发表于 2025-3-26 15:05:24
Measuring and Processing of Electrical Parameters in a Submerged Arc Furnacehe arc enables optimal operating conditions. Direct measurement of the arc characteristics is impossible due to hostile conditions inside the SAF, so controlling the heat dissipation is both a science and an art. The arcs exhibit non-linear electrical characteristics and behave in a complex manner.
大喘气
发表于 2025-3-26 17:48:36
http://reply.papertrans.cn/63/6258/625794/625794_30.png