使显得不重要
发表于 2025-3-26 21:30:53
The EditorsJanislaw M. Skowronski. The primary goal of Professor Skowronski in organizing this series of work shops was to promote the use of advanced mechanics method in control theory with a special emphasis on the control of nonlinear mechanical systems subject to uncertainty. This goal has been achieved t
Delectable
发表于 2025-3-27 04:21:49
http://reply.papertrans.cn/63/6238/623788/623788_32.png
我正派
发表于 2025-3-27 07:14:01
Branden Buehler,Roxanne Samere control law. This approach has been used for the design of tracking controllers for the NASA/JPL 70-m antennas. Several tracking scenarios have been tested (step input, constant rate rise and fall, raised cosine trajectory), and significant improvement of performance has been observed. A wider ban
CAND
发表于 2025-3-27 10:36:22
Garrett W. Nicholsazardous materials depends greatly on available hybrid force and position control schemes. Since the robot as well as its environment are often subject to parameter uncertainties which can not be neglected, it is necessary to design controllers which are robust with respect to these uncertainties. I
纬线
发表于 2025-3-27 14:48:30
Mark McBeth,Tara Paulinye control law. This approach has been used for the design of tracking controllers for the NASA/JPL 70-m antennas. Several tracking scenarios have been tested (step input, constant rate rise and fall, raised cosine trajectory), and significant improvement of performance has been observed. A wider ban
cortex
发表于 2025-3-27 17:45:36
http://reply.papertrans.cn/63/6238/623788/623788_36.png
陈列
发表于 2025-3-28 00:43:00
http://reply.papertrans.cn/63/6238/623788/623788_37.png
Ige326
发表于 2025-3-28 04:39:33
onstant when the thickness of the liquid flow becomes small enough. It becomes an effective quantity that changes significantly with decreasing flow thickness and takes a finite limit value on the wall. The limit (named the boundary viscosity) can be considered as the empirical material characterist
沙草纸
发表于 2025-3-28 06:27:04
Amy Galle of CHS and SHS struts (Section 6.2.1). It is shown that the optimum geometry of trusses depends on the shape of compression members (Section 6.2.2). Optimum design of tubular members with welded joints loaded in fatigue is treated in Section 6.3. Absorbed energy of CHS and SHS braces cyclically lo
FLAX
发表于 2025-3-28 12:40:38
http://reply.papertrans.cn/63/6238/623788/623788_40.png