钳子
发表于 2025-3-28 14:45:50
Oxide Films Formed on MoSi2 Anode in Molten MgCl2–NaCl–CaCl2 and Molten LiCl–KClhe compatibility as an inert anode in the melt is discussed in contradistinction in molten LiCl–KCl. A small anodic current flew continuously during potentio-static electrolysis, and gas bubble generation was seen. The weight of MoSi. was changed by the electrolysis, and an oxide film consisting of
Halfhearted
发表于 2025-3-28 20:44:25
http://reply.papertrans.cn/63/6212/621177/621177_42.png
FOIL
发表于 2025-3-28 23:56:21
Effect of Adding Third Element on Deformability of Mg–Al Alloynisotropy and poor deformability at room temperature, there is a specific demand for developing magnesium alloys with reduced plastic anisotropy. In this study, we focused on the Mg–Al system alloy, which is widely used in commerce, and examined the third element contributing to the reduction of the
一加就喷出
发表于 2025-3-29 06:07:04
http://reply.papertrans.cn/63/6212/621177/621177_44.png
Enthralling
发表于 2025-3-29 10:19:38
Improving the Creep Resistance of Elektron21 by Adding AlN/Al Nanoparticles Using the High Shear Disg alloys. Different high shearing speeds were adopted to investigate the optimum shearing speed for optimum deagglomeration of NPs and enhancing the creep resistance of AlN/Al NPs reinforced El21 alloy. The results showed that the creep resistance of El21 + 0.5% AlN/Al nanocomposite increased with t
parasite
发表于 2025-3-29 13:15:32
http://reply.papertrans.cn/63/6212/621177/621177_46.png
JEER
发表于 2025-3-29 16:25:08
Contemporary Magnesium Die-Casting Research and Technology: A Canadian Viewpoints, presence of a strong industrial sector, and the participation of government funded programs and agencies have fueled significant developments. This paper provides an overview of the developments led by Canadian researchers in the field of magnesium die-casting in alloy development, property, and
Banquet
发表于 2025-3-29 21:59:36
MAXImolding: Vertical Semi-Solid Magnesium Alloy Injection Molding Machine for Mega Volume Productiomaintenance intensive. The cold chamber die-casting and the hot chamber die-casting did not fulfill end user expectations for quality, energy savings, and environmental sustainability. We dedicated all our working life to solve two problems: production of high-integrity net-shape light metal parts,
conception
发表于 2025-3-30 02:27:03
http://reply.papertrans.cn/63/6212/621177/621177_49.png
失败主义者
发表于 2025-3-30 04:36:59
Comparison of Effects of Heat Treatment on Mechanical Properties and Microstructural Behavior of Extk) crystal lattice structure of the magnesium can limit its formability. Thermomechanical processes like extrusion provide refined microstructure, better mechanical properties, and higher ductility than casting. Heat treatment is an effective way to enhance mechanical properties using precipitation