Herpetologist
发表于 2025-3-23 11:50:40
http://reply.papertrans.cn/63/6212/621177/621177_11.png
心神不宁
发表于 2025-3-23 15:15:02
http://reply.papertrans.cn/63/6212/621177/621177_12.png
Decimate
发表于 2025-3-23 21:44:28
Effect of LPSO Phases on Crack Propagation in an Extruded Mg–Dy–Nd–Zn–Zr Alloy Influenced by Heat Trmicrostructural features were characterized by micro and nanohardness, as well as the amount and location of LPSO phases, in dependence on the heat treatment condition. Blocky LPSO phases show a higher hardness than the grains with or without lamellar LPSO phases— more specific by nanoindentation.
屈尊
发表于 2025-3-23 23:26:03
Investigation of Microstructural Factors Affecting the Plane-Strain Fracture Toughness of Mg–Zn–Y–Al of fracture toughness. The alloy subjected to pre-extrusion heat treatment at ~738 K for 24 h exhibited a good balance of plane-strain fracture toughness (. = ~15 MPam.) and tensile yield strength (σ. = ~400 MPa).
上下连贯
发表于 2025-3-24 04:55:53
MAXImolding: Vertical Semi-Solid Magnesium Alloy Injection Molding Machine for Mega Volume Productiorol loop based on the parts “quality indicators and proper AI algorithms” [., .]. This is an intrinsically safe, energy and material efficient, environmentally sound magnesium-molding self-learning smart factory with no emissions outside of factory parameters limits.
exostosis
发表于 2025-3-24 09:52:50
The Effect of Process Parameters on the Microstructure of Semi-solid Slurry of AZ91 Magnesium Alloy e major effect on the globularity and the grain size. The results showed that at the optimum condition of the gas flow rate of 4 L/min, gas purging temperature of 610 °C, gas purging time of 10 s, the globularity of 0.75, the average α-Mg globule size of 58.4 μm, and the average number of 168 α-Mg g
RENIN
发表于 2025-3-24 12:27:40
http://reply.papertrans.cn/63/6212/621177/621177_17.png
名字的误用
发表于 2025-3-24 18:52:22
http://reply.papertrans.cn/63/6212/621177/621177_18.png
伴随而来
发表于 2025-3-24 22:23:43
http://reply.papertrans.cn/63/6212/621177/621177_19.png
不能根除
发表于 2025-3-25 02:42:46
Takamasa Miyoshi,Taiki Morishige,Toshihide Takenaka