健忘症
发表于 2025-3-23 09:45:01
http://reply.papertrans.cn/63/6209/620839/620839_11.png
Mobile
发表于 2025-3-23 14:57:45
Fused Deposition Modeling of PCL/HA/MMT Biocompatible Polymer Nano-composites,repared by the mechanical of polycaprolactone (PCL), montmorillonite (MMT) and hydroxyapatite (HA) using a single screw extruder nanomixer. The amount of MMT material varied from 2 to 4 (wt%) and the HA was fixed at 10 (wt%). Then, the blended material was crushed and fed into a single a screw extru
pacifist
发表于 2025-3-23 19:05:03
Forming Temperature Investigation of Aluminum and Aluminum/Silicon Carbide Using Image Texture Feated composites specimens gives a degree of understanding of the effect of deformation process conditions. In recent years, the advent of high-speed, general-purpose, digital computers and vision systems has made image analysis easier and more flexible. Computer vision technology has maintained tremen
AGGER
发表于 2025-3-24 02:01:24
http://reply.papertrans.cn/63/6209/620839/620839_14.png
自由职业者
发表于 2025-3-24 05:33:59
http://reply.papertrans.cn/63/6209/620839/620839_15.png
Strength
发表于 2025-3-24 06:53:34
Mechanical Property Evaluation of Gas-Metal-Arc Welded SKD 61 Hot Work Tool Steel, hot work tool steel by applying pulse current. Two steel plates with V groove at the connected edge, were welded under the condition of 150, 170 and 190 A of welding currents, 16–25 V of arc voltages and 1.5 mm/s of welding speed. A consumable copper-coated solid wire electrode was used in this wel
气候
发表于 2025-3-24 11:09:13
Investigation of Bond Strength of Spray Dried Hydroxyapatite-Wollastonite Composite Powder After Plar structure with natural bone, bioactivity, and stability in body fluid. HA has excellent biological properties, while plasma sprayed HA coatings have poor bond strength which makes it difficult to use HA coated implants under mechanical stress. Wollastonite (CS) is a calcium silicate based bioacti
Fester
发表于 2025-3-24 18:36:17
The Hardness Variation Due to Secondary Heating in Friction Stir Welding of Small Diameter Aluminiusections and stirred/joined them together as one part without filler. In the FSW of pipe joining, a tool rotating at high speeds will start and stop at the same point in order to complete full weld cycle. The FSW of a small diameter pipe can cause secondary heating to occur at the start and stop poi
分发
发表于 2025-3-24 22:24:32
The Material Hardness and Tensile Strength of AA5083 Aluminum Alloy Friction Stir Welding Lap Jointhip building, aviation, and transportation industry [.]. Friction stir welding (FSW) is a new non-flammable welding technique particularly well suited to aluminum alloys, though this technique is also used for other materials. Friction stir welding promises joints with low defects, fine microstructu
GROVE
发表于 2025-3-25 02:02:26
http://reply.papertrans.cn/63/6209/620839/620839_20.png