摄取
发表于 2025-3-25 04:43:11
Julius Cronau,Florian Engstlerete by the concrete products based on mineral fillers and binders is discussed. Compression strength, bending strength, and kinetics of the development of linear strains of concrete during cyclic tests in the conditions of aggressive medium are studied.
FUSC
发表于 2025-3-25 11:03:17
http://reply.papertrans.cn/59/5835/583437/583437_22.png
debris
发表于 2025-3-25 14:49:53
http://reply.papertrans.cn/59/5835/583437/583437_23.png
patella
发表于 2025-3-25 19:19:02
Determination of the Fatigue Behaviour of Laser Powder-Bed Fused AlSi10Mg Specimens Using Surface anshing. In order to investigate the fatigue strength, fatigue tests were carried out in the tensile threshold range at an .-value of 0.1. The fracture examination was carried out with the aid of a scanning electron microscope.
atopic
发表于 2025-3-25 21:58:27
http://reply.papertrans.cn/59/5835/583437/583437_25.png
消灭
发表于 2025-3-26 01:45:05
http://reply.papertrans.cn/59/5835/583437/583437_26.png
删除
发表于 2025-3-26 06:03:48
http://reply.papertrans.cn/59/5835/583437/583437_27.png
ANT
发表于 2025-3-26 08:29:02
http://reply.papertrans.cn/59/5835/583437/583437_28.png
organism
发表于 2025-3-26 15:58:52
Elastoplastic Characterization of a Two-Component Epoxy-Based Structural Adhesive with air inclusions larger than 100 µm from the analysis, the scatter in the results is reduced to an acceptable level. Assuming isotropic material behavior, the mechanical response of the adhesive is fully characterized by additionally determining the shear modulus. This is done through torsion te
性行为放纵者
发表于 2025-3-26 18:32:07
http://reply.papertrans.cn/59/5835/583437/583437_30.png