臆断
发表于 2025-3-25 06:04:53
A Simple Analytical Model of Laser Bending Process,ds have been proposed for the estimation of bend angle. A brief review of these methods is presented. A finite element analysis of laser bending process is carried out with ABAQUS package for the purpose of understanding the physics of the laser bending. Afterwards, a simple analytical model is deve
hieroglyphic
发表于 2025-3-25 10:31:17
http://reply.papertrans.cn/59/5817/581670/581670_22.png
aerial
发表于 2025-3-25 13:51:56
Finite Element Simulations of Laser Bending of Small Sized Sheets,tivity and flexibility. In this work, finite element simulations of bending of small sized sheets are carried out using ABAQUS package. The temperature and strain-rate dependent material properties of D36 shipbuilding steel sheet are considered. Simulation results throw light on the bending behavior
Banquet
发表于 2025-3-25 16:31:38
Numerical and Experimental Studies on Pulsed Laser Forming of Sheet Metal,trolled discontinuous laser irradiations. The temperature and deformation fields have been determined using finite element analysis under different processing conditions. Two types of pulsed laser forming processes, i.e., overlapped and discrete spot forming have been identified depending on the com
勤劳
发表于 2025-3-25 23:49:48
http://reply.papertrans.cn/59/5817/581670/581670_25.png
用肘
发表于 2025-3-26 00:46:24
http://reply.papertrans.cn/59/5817/581670/581670_26.png
附录
发表于 2025-3-26 05:07:24
Surface Alloying of Aluminum with Copper Using CO2 Laser,ke Cu, Mg, Ni, Cr, and Zn provides enhanced service life. In this work, commercially available 99 % pure aluminium was alloyed with copper powder of 10 μm particles size, which was melted by CO. laser. Three different methods were used for uniform placing of 95 % copper powder and 5 % aluminium powd
SSRIS
发表于 2025-3-26 12:29:23
http://reply.papertrans.cn/59/5817/581670/581670_28.png
无动于衷
发表于 2025-3-26 16:20:41
Finite Element Simulation of Laser Cladding for Tool Steel Repair,s of the work-piece such as wear resistance, corrosion resistance etc. Strong interfacial bond with minimum dilution between the material layers is a pre-requisite of the process. This technique also finds widespread applications in repair and restoration of aerospace, naval, automobile components.
Clinch
发表于 2025-3-26 17:39:21
http://reply.papertrans.cn/59/5817/581670/581670_30.png